Home > Fiber Optics > Fiber Optic Termination, Fiber Polishing > Epoxy & Curing Equipment

Anaerobic Adhesive

Image	Product Code	Description	Price	Availability
	1101045-01	Corning Anaerobic Adhesive Kit - Anaerobic Adhesive(680), Primer(7649) and 10 pcs 3cc More Info >> This anaerobic adhesive kit from Corning Cable Systems are designed to work with anaerobic connectors. Please refer to the connectors department for Anaerobic Connectors info. Kit includes: 1. One 10ml Loctite 680 anaerobic adhesive (P/N: 680) 2. One 1.75 oz. Loctite 7649 primer N (P/N: 7649) 3. 10 pcs of 3cc syringes and needles This kit provides enough material for terminating more than 100 connectors. .	$75.50	In Stock	Qty:
	680	Loctite 680 High Strength/High Viscosity Anaerobic Adhesive More Info >> This item comes in a 10ml bottle. LOCTITE® Product 680 is a high strength, single component anaerobic retaining adhesive for cylindrical joints. The product cures when confined in the absence of air between close fitting metal surfaces. This product is used on specially designed Anaerobic connectors. Please refer to our connectors department for more information about these connectors. 680 can be used with Loctite 7649 Primer N to increase cure sp.	$19.50	In Stock	Qty:
	7649	Loctite 7649 Primer N More Info >> This item comes in a 1.75 fluid oz bottle. LOCTITE® ACTIVATOR 7649 Primer N is a single component non-CFC solvent based surface activator. The activator is designed to promote the speed of cure of Loctite anaerobic adhesives and sealants such as Loctite 680. 7649 can be used with Loctite 680 (PN:680) on specially designed Anaerobic connectors to increase the cure speed. Please refer to our connector department to get more information about these connectors. .	$15.95	In Stock	Qty:
	F1-ANAEROBICKIT	Anaerobic Adhesive Kit (Anaerobic Adhesive, Primer & Syringe Tips) More Info >> Anaerobic Adhesive Kit (Anaerobic Adhesive, Primer & Syringe Tips). This two-part system self cures in minutes with no heat required. The retaining compound is injected into the connector with a syringe needle.Dip or spray the fiber with primer and connectorize as usual. Sets up in seconds, fully cured in minutes. FOFS does not recommend the use of anaerobic adhesive unless specified by connector manufacturer. Hazmat material. Domestic ground shipment only. .	$89.00	In Stock	Qty: