Compact/Mini Wall Mount Enclosures

The Molex 601 series compact wall mount enclosures are compact units for terminating optical fiber up to 24 fibers, dependent on adapter type.

This Molex compact wall mount enclosure is made of rugged white plastic and have a low profile.

(7.25"H x 5"W x 1.5"D).

Yet it provides the proper internal fiber management to ensure the integrity of the optical network.

Sufficient storage room for the fiber service loop makes instalaltion easy.

There is also provision fo.

The Molex 601 series compact wall mount enclosures are compact units for terminating optical fiber up to 24 fibers, dependent on adapter type.

This Molex compact wall mount enclosure is made of rugged white plastic and have a low profile.

(7.25"H x 5"W x 1.5"D).

Yet it provides the proper internal fiber management to ensure the integrity of the optical network.

Sufficient storage room for the fiber service loop makes instalaltion easy.

There is also provision fo.

MOLEX COMPACT WALL MOUNT.

Compact wall mount, 6-port SC style, unloaded This low profile enclosure is constructed of white rugged plastic and provides proper internal fiber management.

Includes mounting screws, warning label and cable ties.

Dimensions: 7.25" H x 5" W x 1.5" D Download Product Spec Sheet: WFR-00030-02 Molex Compact Wall Mo.

FOFS 4 PORT WALL MOUNT.

4-Port Wall Mount Box for (2) SC Duplex Adapters - Adapters not included.

The 4-Port Wall Mount Box is a compact design ideal for data applications.

It can either be wall mounted or placed in a floor box and can house up to (4) fibers, inline adapters and pigtails.

Cables can be easily terminated or spliced together.

The wall mount has facilities for incoming cable/fiber to be presented via mini-trunking grommets.

Dimensions: 5"(W) x 6.

Wall Mount Fiber Optic NID Terminal Box is designed to provide protection for fiber optic connectors and splices in indoor or outdoor environments.

The enclosure has a built in, swing-out mini splice tray plus a bulkhead panel with SC cutouts ports.

2 or 3 Cable access ports with built in weather- tight grommets allow for easy cable installation.

Adapters not included.

For wall mount applications Built in swing-out mini splice tray Can accomidate.

The 19" High density rack mount panel box provides many flexible configurations in a 4RU form factor.F1-RU72 can be configured to hold 12 adapter panels.These boxes are prefect for high density applications or any location where rack space is at premium.

The injection molded, lightweight distribution box is a streamlined design providing convenient double door entry at a super low price.

The beige colored unit contains a plate holding up to 24 mating sleeves.24 Port (SC Unloaded),17.25"H x 11.25"W x 4"D.

The splice enclosure unit utilizes a 12 position molded splice chip to secure splices, for controlled environments, to be mounted on a wall.

Cable entry grommets secure incoming/outgoing cable up to 12mm.

Inside clamps provide the ability to coil excess cable.

The F1-2011 is the same; it replaces splice holding chips with two mounted ST Mating Sleeves, handling up to 7mm cable.

Dimensions: 2 1/8"(W) x 6 3/4"(L) x 4 3/4"(H).

The splice enclosure unit utilizes a 12 position molded splice chip to secure splices, for controlled environments, to be mounted on a wall.

Cable entry grommets secure incoming/outgoing cable up to 12mm.

Inside clamps provide the ability to coil excess cable.

The F1-2011 is the same; it replaces splice holding chips with two mounted ST Mating Sleeves, handling up to 7mm cable.

Dimensions: 2 1/8"(W) x 6 3/4"(L) x 4 3/4"(H).

.