Corning WCH Seris Wall Mount Closet Housings

Corning Cable Systems Wall-Mountable Connector Housings provide interconnect or cross-connect capabilities between the outside plant, riser, or distribution cables and the opto-electronics.

The unit can be wall-mounted in main cross-connects (MCs) or telecommunication rooms (TRs).

It holds 2 Corning CCH connector panels which provides up to 12 fiber connections.

Optional locking kit for the center door is available for extra protection.

Also available are optional splice tray.

Corning Cable Systems’ Wall-Mountable Connector Housings provide interconnect or cross-connect capabilities between the outside plant, riser, or distribution cables and the opto-electronics.

The unit can be wall-mounted in main cross-connects (MCs) or telecommunication rooms (TRs).

It holds 6 Corning CCH connector panels which provides up to 36 fiber connections.

Optional locking kit for the center door is available for extra protection.

Also available are optional splice tray h.

This splice tray holder is designed for Corning Cable Systems WCH-02P Wall Mountable Connector Housings.

This splice tray holder accommodates two 0.2 inch thick (type 2R) or one 0.4 inch thick (type 4R) reduced-length splice trays.

This is the tray holder only, splice trays must be ordered separately.

Please refer to Corning Cable Systems M67 series splice trays.

This splice tray holder is designed for Corning Cable Systems WCH-04P, WCH-06P and WCH-012P Wall Mountable Connector Housings.

This splice tray holder accommodates twelve 0.2 inch thick (type 2R) or six 0.4 inch thick (type 4R) reduced-length splice trays.

This is the tray holder only, splice trays must be ordered separately.

Please refer to Corning Cable Systems M67 series splice trays.

This Cornign Cable Systems M67-110 Type 4R metallic splice tray is designed for use with CCS interconnection hardware and splice closures.

It is designed to hold 12 heat shrink single fiber splice sleeves or 6 heat shrink ribbon fiber splice sleeves and consists of a rugged aluminum base and cover.

This tray has crimpable metal tabs that provide buffer tube strain-relief.

Additional strain-relief points are available for securing buffer tubes or pigtails to the trays using cable ties.

.

CCH-CP06-15T Closet Connector Housing Panel is preloaded with 6 simplex threaded bulkhead ST adapters for use with the Corning CCH, WCH and EDC series enclosures.

The ST adapter has ceramic sleeve, composite housing and is designed for 62.5um multimode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet C.

CCH-CP06-3C Closet Connector Housing Panel is preloaded with 6 simplex SC adapters for use with the Corning CCH, WCH and EDC series enclosures.

The SC adapter has ceramic sleeve, composite housing and is designed for single mode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet Connector Housing Panel is designed.

CCH-CP12-15T Closet Connector Housing Panel is preloaded with 12 simplex threaded bulkhead ST adapters for use with the Corning CCH, WCH and EDC series enclosures.

The ST adapter has ceramic sleeve, composite housing and is designed for 62.5um multimode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet Connector.

CCH-CP12-59 Closet Connector Housing Panel is preloaded with 6 duplex SC adapters for use with the Corning CCH, WCH and EDC series enclosures.

The SC adapter has ceramic sleeve, composite housing and is designed for single mode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet Connector Housing Panel is designed.

CCH-CP12-97 Closet Connector Housing Panel is preloaded with 6 MT-RJ adapters for use with the Corning CCH, WCH and EDC series enclosures.

The MT-RJ adapter is designed for 62.5um multimode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet Connector Housing Panel is designed for applications where specified label.

CCH-CP12-A8 Closet Connector Housing Panel is preloaded with 6 duplex LC adapters for use with the Corning CCH, WCH and EDC series enclosures.

The LC adapter has ceramic sleeve, composite housing and is designed for 62.5um multimode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet Connector Housing Panel is desi.

CCH-CP24-E4 connector panel is preloaded with 12 duplex LC adapters for use with the Corning CCH, WCH and EDC series enclosures.

The LC adapter has ceramic sleeve, composite housing and is designed for 300m 10 Gig multimode connectors.

The panel is used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the interconnect hardware.

In most applications, the Closet Connector Housing.