These new fiber optic strippers are made in the USA.

Choose from strippers that remove the 3mm jacket, 900um and 250um buffer coating.

Precision blades produce consistent clean strips.

Tool length: 6.25 inches.

.

These new fiber optic strippers are made in the USA.

Choose from strippers that remove the 3mm jacket, 900um and 250um buffer coating.

Precision blades produce consistent clean strips.

Tool length: 6.25 inches.

.

This Miller stripper is designed for stripping 250 micron buffer coating to 125um cladding.

Features: 1.

For stripping 250 micron buffer coating from 125 micron optical fiber 2.

Precision diameter hole & V-opening in blade allow for accurate buffer coating removal 3.

Factory set, requires no adjustment 4.

Prevents scratching or nicking of optical fiber 5.

All cutting surfaces are precision formed, hardened, tempered and ground a.

This stripper from Miller featuring new three-hole performs all common fiber stripping functions in one compact tool.

1.

Standard 250um to 125um stripping 2.

Remove 900um tight buffer to 250um buffer coating 3.

Hole for removal of 2 to 3 mm fiber jackets 4.

Same consistent quality and features found in the standard WO1224 tool   Download Product Spec Sheet:.

This NO-NIK stripper has a 175um stipping blade.

Mustard colored handle.

This stripper strips loose tube (such as a 900um loose tube) and 250um, 400um or 500um coating to expose the 125um cladding without damaging the cladding.

This tool is intended to use on loose tube enclosed 250um, 400um or 500um bare fiber to expose the 125um cladding.

This NO-NIK stripper has a 254um stipping blade.

Light blue colored handle.

This stripper strips the 900um tight buffer to expose the 250um coating without damaging the coating itself.

Features a Light Blue color-coded handle and a minimum stripping diameter of 254µm.

This tool is intended to use on 900um tight buffer fiber to expose the 250um coating.

Download Product Spec Sheet:.

NN300 - Clauss Strip Kit (Mustard, Red, & WO-1225), strips 250um, 500um, 900um buffer tube & 3mm Accurate to -0 mm, +.0127 mm Exclusive centering device positions fiber for precise scoring andremoval of buffer coating Razor-sharp blades score buffer without cutting through it Color-coded, cushion-grip handles for quick identification Plastic heads, which make contact only with the Buffer, centerand support your.

This Clauss stripper is designed to strip 250um coating fiber to 125um cladding with additional feature of fiber jacket stripping.

Features: 1.

1.0mm diameter stripping hole at tip of tool can be used to strip the fiber jacket 2.

140um diameter hole and V-opening in blade allows removal of 250um buffer coating from 125um fiber 3.

Comfort-grip, ergonomic handles 4.

Pre-set at the factory—no adjustments needed 5.

Will not scratch or nick glass fiber.

This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900um tight buffer coating to 125um fiber cladding.

(It doesn’t work on 250um or 400um coating.

Additional fiber guide, fiber guide lock and blade set need to be ordered separately) This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.

This tool is AA battery-.

This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125um, 140um and 230um cladding.

The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool.

Components are for stripping fiber coating/buffer up to 900¦m, and jackets up to 3.5 mm.

This is the replacement blade set which strips to 125um cladding for the MS-FOK-1 Micro-Strip Stripper Kit.

Purple color.

This is the replacement blade set which strips to 250um coating for the MS-FOK-1 Micro-Strip Stripper Kit.

Royal blue color.

The new multi-function fiber optic stripper from Paladin has five settings for stripping fiber optic cable.

Product Features: Strips outer jacket from 2.0-2.4mm fiber, 2.8-3.0mm fiber and 2.0-3.0mm loose tube buffer tubes.

Strips 900μm buffer from loose buffer without removing acrylate coating.

Strips buffer and acrylate from 900/125μm and 250/125μm fiber.

Factory set and calibrated.

.

This fiber stripper from Ideal Industries has two notches with the ability to remove outer jackt and strip 900um/250um buffer/coating to 125um cladding.

Features: 1.

The small V-notch is designed to remove 900um buffer and 250um coating material from 125um fiber.

2.

The large V-notch is designed to strip wide range of outer cable jacket insulations.

3.

Blade area heat-treated for durability 4.

Laser marked for easy identification 5.

Extra durable to with.

The JR-25 single fiber stripping tool can be used to remove primary coating from 250um or 400um coated fibers, or to remove both the primary and secondary coating from 900um coated fibers.

Guides either side of the blade help ensure the fibers do not contact the blade during stripping, thus maintaining the long term strength of the fiber after splicing.

Features: 1.

Compact and Lightweight for Easy Handling 2.

Field Replaceable Blades 3.

Proper Removal Technique Pro.