Corning Cable Systems Series

The Corning Cable Systems Environmental Distribution Center (EDC) product family incorporates design features that allow the product to better accommodate the changing requirements and growing needs of fiber optic networks.

By improving on the original design, the EDC product family continues to set the standard for the future of interconnect hardware.

As a component of Corning Cable Systems LANscape« Fiber Cabling Solutions, the EDC will accept Closet Connector Housing (CCH) panels and splice.

The Corning Cable Systems Environmental Distribution Center (EDC) product family incorporates design features that allow the product to better accommodate the changing requirements and growing needs of fiber optic networks.

By improving on the original design, the EDC product family continues to set the standard for the future of interconnect hardware.

As a component of Corning Cable Systems LANscape® Fiber Cabling Solutions, the EDC will accept Closet Connector Housing (CCH) panels and splice.

The Corning Cable Systems Environmental Distribution Center (EDC) series don't have cable entries holes provides.

This conduit fitting enables the EDC housing to mate with 2 inch conduit.

Contents: Two NEMA 4 rated conduit fittings for 2" conduit Note: The housing will have to be field-modified to accept this fitting.

This fitting is not included in the EDC closure kit and must be ordered separately.

The hardware ground kit is primarily used to ground armored cable and cable with a conductive central member.

Kit Contents: 1.

(2) Ground wires 2.

(2) Mounting screws 3.

(1) Bus bar 4.

(1) Ground clamp 5.

(2) Nuts.