LYNX precision cleaver is on a par with more expensive cleavers from Fitel, AFL and other brand name manufacturers but with a VERY competitive price! The LYNX precision cleavers provides clean, accurate cleaves required for fusion splicing.

It is also ideal for preparing fiber for quick-term style connectors such as Corning UNICAMs and other pre-polished connectors.

LYNX features a cleave angle of 90 degrees +- 0.5 degrees.

Its 16-position blade provides approximately 48.

This is a BRAND NEW blade for F1-LYNX Leviton LYNX Precision Fiber Cleavers.

The CT-30 cleavers set the standard for portability, reliability and ease of use.

Available for either signle fiber or ribbon splicing (up to 12 fiber ribbons) applications.

The CT-30A Cleavers are compatible with all AFL Telecommunications fusion splicers.

Designed for excellent portability, the CT-30A is equally at home in a splicing van or in a bucket truck and is ideal for FTTx applications.

The 16-position blade yields 48,000 single-fiber cleaves, or 4,000 12-fiber ribbon cleav.

The AFL CT-10A fiber optic cleaver provides high quality cleaving at an economical price.

Designed for cleaving single fibers only , this cleaver is best suited for the installation of field installable connectors and mechanical splices.

The rugged yet scaled-down design offers cleave quality approaching that of more expensive high precision cleavers.

The long-life, 16-position flat diamond blade is easily replaced by the end user and performs cleaving operation i.

S006244 is the replacement blade for AFL Fujikura CT-07, CT-100B and CT-80B fiber optic cleavers.

S014096 is AFL's AD-30A adapter plate for CT-30 fiber cleavers.

It is used for variable length cleaving with the CT-30 high precision fiber cleaver.

The Fitel S325A precision cleaver solves the dilemma of stray fibers with a unique disposal system incorporated into the design.

A disposal chamber built into the cleaver automatically collects cleaved ends, eliminating manual disposal and possible injury due to stray fibers.

The chamber is also easily removable for dispensing into a trash can.

The automatic cleave function provides constant cleaving pressure and improves cleave quality.

The cutting blade locks into pl.

Sumitomo FC-7 One Step Hand Held Fiber Cleaver The FC-7 is ideal for use in fusion splicing, field termination, or any other precision application.

It has a simple cleaving operation that can be performed in the palm of the hand, which allows the user to take the cleaver to fiber in limited slack applications.

Single-hand, single-action operation.

To cut an optical fiber, just hold the cleaver lightly with one hand.

Suitable for mechanical-splice, field-assembly.

This is a BRAND NEW blade for Sumitomo FC-7 and FC-6MC fiber cleavers.

Genuine Sumitomo Part.

Not third party manufacturered.

Tyco 1871696-1 high precision fiber cleaver from Tyco/AMP is an attractive cleaver tool for any quick termination connector kit.

This fiber cleaver provides cleaving lengths of 4mm, 6mm and 8mm.

Cleaved surface angle is <1.5° and typically can achieve 10,000 cleaves without adjustment.

It can be used with AMP CORELINK mechanical splices, standard fusion splices, AMP LightCrimp Plus connectors, MTRJ jack and more.

The compact design is especially attractive.

Download 1871696-1.