The Wilcom Model F6121A Optical Fiber Identifier identifies optical fibers by detecting the optical signals being transmitted through a singlemode or multimode fiber.

By utilizing local detection technology (nondestructive macro-bend detection), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.

It operates by inserting fiber into the top of the unit which performs a macro-bend on the fiber.

T.

The Wilcom Model F6222C Optical Fiber Identifier identifies optical fibers by detecting the optical signals being transmitted through a singlemode or multimode fiber.

By utilizing local detection technology (nondestructive macro-bend detection), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.

It operates by inserting fiber into the top of the unit which performs a macro-bend on the fiber.

T.

The Wilcom 044-197731 is an optional 3.0-mm Adapter for the F6222C CATV Optical Fiber Identifier and F6121R Optical Ribbon Fiber Identifier, F6121A Basic Fiber Identifier & F6222 Advanced Fiber Identifier.

.

The Wilcom 044-20715011 is an optional 1.6 mm Adapter for the F6222C CATV Optical Fiber Identifier and F6121R Optical Ribbon Fiber Identifier, F6121A Basic Fiber Identifier & F6222 Advanced Fiber Identifier.

.

This Fitel fiber identifier works on single mode ribbon, 900um tight buffer, 1.6mm cable, 3.0mm cable and optional 2mm cable (all single mode).

Just insert fiber into the top of the unit which performs a super low insertion loss macro-bending to detect the presence of light and the direction of light.

Product Specs: Works with up to 12 fiber ribbon 250um single fiber.

Detector sensitivity: Ribbon: -38dBm, 900um tight buffer: -33dBm, 1.6~.

The EXFO LFD-300 Fiber Finder can identify traffic, direction and tone detection on both active and dark fibers.

With less than 1dB of induced loss, a live fiber can quickly be located and the power measured while minimizing network access time and the possibility for errors.

Download Product Spec Sheet: EXFO LFD-300 Fiber Identifer and TG-300B Fiber Toner Spec Sheet (PDF).

The EXFO TK-FF kit includes both the FBD-300 Fiber Finder and TG-300 Toner along with a case, AC adapter and an instrument clamp to aid single person operation.

The EXFO Fiber Finder can identify traffic, direction and tone detection on both active and dark fibers.

With less than 1dB of induced loss, a live fiber can quickly be located and the power measured while minimizing network access time and the possibility for errors.

The TG-300 is a non-intrusive, non-disruptive ton.

The Noyes OFI 200D Optical Fiber Identifier is a low-cost, high-tech approach to non-invasive fiber optic signal detection.

Using a lowinsertion loss, macro-detection technique, it discriminates signals without disrupting service or overstressing fiber.

By simply clamping an Optical Fiber Identifier onto a gently bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and identify signal direction.

This is all done with no head swapping or adjustments.