Oscilloscope Probes - O/E Converters

Fiber optic O/E converter with ST connector input, amplified 125MHz The TIA-525 Optical to Electrical Converter is a convenient battery-operated detector/amplifier combination that mounts directly on the input of an oscilloscope, digitizer, or other readout device.

With a band width of DC to 125 MHz, it accurately provides an electrical replica of the optical signal presented to it.

It is fully capable of driving a 50 ohm cable terminated in its characteristic load.

.

Fiber optic O/E converter with FC connector input, amplified 750MHz The TIA-950 is the optimum instrument for the laboratory or for field use.

This optical receiver can be used with a wide range of oscilloscopes and digitizers to provide the utility of a convenient, easy to use fiber optic probe.

This compact unit mounts directly on the BNC input of an oscilloscope.

Energizing the unit, the optical signal presented to it is faithfully reproduced on the.

Fiber optic O/E converter with FC connector input, amplified 10GHz The TIA-3000 Optical to Electrical Converter is a convenient high bandwidth detection system for fiber optic applications.

With a typical bandwidth of DC to 10 GHz, it accurately provides an electrical replica of the optical signal presented to it.

It is intended to drive a 50 ohm cable terminated in its characteristic impedance.

The unit is equipped with an InGaAs/InP detector that is responsive in th.