This hand held power meter has a 2mm germanium detector and is calibrated at 850nm, 1310nm and 1550nm.

The zero set function can store a separate reference for each calibrated wavelength.

This power meter has a -65dB to +5dB dynamic range, accuracy of +/-0.3dB and 0.01dB resolution.

It can measure both single mode and multimode.

Please choose your adapter from 2.5mm universal, 1.25mm universal, ST, FC, SC, LC, MTRJ or SMA.

Special features include: auto shut off, zero set fu.

This hand held power meter has a 2mm germanium detector and is calibrated at 1310nm, 1490nm, and 1550nm.

The zero set function can store a separate reference for each calibrated wavelength.

This power meter has a -65dB to +5dB dynamic range, accuracy of +/-0.3dB and 0.01dB resolution.

It can measure both single mode and multimode.

Please choose your adapter from 2.5mm universal, 1.25mm universal, ST, FC, SC, LC, MTRJ or SMA.

.

A power meter is the essential tool for measuring optical power within a fiber optic link.

This FOFS ruggedized power meter is a solid performer, with 0.01dB resolution.

Standard units test from +5dBm to -65dBm.

This ruggedized power meter is housed in a impactresistant, waterproof housing, this unit is ideal for harsh work environments.

Power Meters are shipped with a 2.5 mm Universal Adapter.

Manual and Power Supply / Charger included.

Other Power Meter adapters available.

This is the input connector adapter for F1-8513HH, F1-8513HR, F1-8513HHCATV and F1-8513HRCATV.

It has a 1.25mm hole and will accept standard LC, MU and other 1.25mm small form factor connectors.

This is the input connector adapter for F1-8513HH, F1-8513HR, F1-8513HHCATV and F1-8513HRCATV.

It will accept both single mode and multimode SC connectors.

This is the input connector adapter for F1-8513HH, F1-8513HR, F1-8513HHCATV and F1-8513HRCATV.

It will accept MTRJ connectors.

This is the input connector adapter for F1-8513HH, F1-8513HR, F1-8513HHCATV and F1-8513HRCATV.

It will accept both SMA 905 and SMA 906 connectors.

Rugged Carry Case for FOFS Power Meters and Light Sources.

The PM1 series of Power Meter are designed for use with an Optical Source for performing optical loss measurements on fiber optic cables.  PM1 series are designed for the low budget.

It can meet the the basic demand in real testing.

With the smaller size and weight, it is easier to take in real testing.  Download Spec Sheet: PM-102A Power Meter PDF Spec Sheet.

The PM2 series of Power Meter are the advanced version of PM1 series.

It is more functional and intelligent.

Under the situation of laboratory, LANs, WANs and CATV as well as longdistance optical network, the Optical Power Meters, together with PRO's Stabilized Laser Sources, can be used to identify optical fiber, measure optical attenuation, verify continuity and evaluate fiber link transmission quality.

Auto-Wavelength Recognition The PM-202D unit can transm.

The PM2 series of Power Meter are the advanced version of PM1 series.

It is more functional and intelligent.

Under the situation of laboratory, LANs, WANs and CATV as well as longdistance optical network, the Optical Power Meters, together with PRO's Stabilized Laser Sources, can be used to identify optical fiber, measure optical attenuation, verify continuity and evaluate fiber link transmission quality.

Auto-Wavelength Recognition The PM-202D unit can transm.

The EXFO Fiberbasix EPM-50 Power Meter allows power measurements up to 26 dBm with battery autonomy of over 300 hours.

It comes with a specific high power configuration for CATV and Telco markets.

The EPM-50 Power Meter, which offers high accuracy and referencing capabilities.

EXFO's FiberBasix 50 series meets your basic day-to-day test requirements while helping you stay within budget.

These worry-free, straightforward handheld testers enable accurate measurement of.

This EXFO PPM-350C PON power meter is truly optimized for EPON and GPON architectures.

Pass/Warning/Fail indicators for easy assessment of power values.

Simultaneous measurement and display of all PON signals – Voice, Data and Video.

The most easy-to-use instrument of its kind: simply connect the fiber and read the results.

PPM-350C PON Power Meter Kit Contents: PPM-350C PON Power Meter Quick Reference Guide USB Cable S.