Permanent mechanical splicing of single mode and multimode fiber.

1. Simple, easy-to-use, high-performance mechanical splice
2. Features a 'cam' locking device
3. Requires no adhesive
4. Accepts both primary and secondary coated fibers
5. Splice is reusable
6. Installation takes less than 2 minutes
7. Average splice loss: 0.15dB
8. Return Loss >45dB
9.. Dimensions: 44 x 4.2mm

Corning Cable Systems CamSplice™ Mechanical Splice is simple and craft-friendly for both multimode and single-mode fibers. It features a “cam” locking mechanism, which requires no adhesive. The CamSplice can used with or without the Assembly Fixture.

The CamSplice Mechanical Splice incorporates a unique, patented fiber alignment method that self-centers the fibers and provides extremely accurate alignment. Average “blind” (non-tuned) splice loss for the CamSplice Mechanical Splice is specified at 0.15 dB with a minimum loss less than 0.3 dB. There is only one part for 250/250 μm, 250/900 μm or 900/900 μm applications (one size fits all). 

The CamSplice Mechanical Splice requires minimal training and few accessories to assemble. The assembly process involves stripping and cleaving fibers, inserting the fibers into the splice part until they touch and turning the cams to secure the fibers. 

The process does not involve any adhesives or special tools, although an optional assembly fixture is recommended. A typical installation takes less than two minutes. A compact, self-contained tool kit is available with standard tools including the optional assembly fixture. Completed splices fit in Corning Cable Systems splice trays as well as industry-standard splice trays.

Download the Siecor Camsplice specification sheet