Ultrasleeve Protection Sleeve - No Heat Required

Image	Product Code	Description	Price	Availability
	F1-FS40	Dia. 3.0mm x 40mm(L) ULTRAsleeve Fusion Protection Sleeve More Info >> This 3.0mm(dia.) x 40mm(L) ULTRAsleeve is designed for protection of less than 12mm strip length fusion splices and is green colored. No Heat Required. This sleeve can accept a range of fiber buffer sizes 250-900um for a single fiber or up to a 4 fused ribbon fiber. The sleeve is easy to install and requires no heat shrink, curing, crimping or gluing. It is manufactured with an acrylic foam tape to seal against environmental conditions and improve lon.	$2.45	In Stock	Qty:
	F1-FS60	Dia. 3.0mm x 60mm(L) ULTRAsleeve Fusion Protection Sleeve More Info >> This 3.0mm(dia.) x 60mm(L) ULTRAsleeve is designed for protection of over 12mm strip length fusion splices and is blue colored. This sleeve can accept a range of fiber buffer sizes 250-900um for a single fiber or up to a 4 fused ribbon fiber. The sleeve is easy to install and requires no heat shrink, curing, crimping or gluing. It is manufactured with an acrylic foam tape to seal against environmental conditions and improve long term splice reliabilit.	$2.70	In Stock	Qty: