Home > Fiber Optics > Fiber Optic Splicing Products > Fusion Splice Protection Sleeves (Fiber and Ribbon)

Ribbon Sleeve - for Ribbon Fibers

Image	Product Code	Description	Price	Availability
	10112DP	Dia.4.9mm x 5.7mm x 40mm(L) Dual Strength Member Ribbon Sleeve - Clear Color More Info >> This sleeve is designed for ribbon fibers. It has two strength members which eliminates any undue stress on the ribbon thus creates a perfect flat exit for the ribbon. It has one quartz strength member,one polyetherimide strength member, an inner ribbon tube and an outer shrink tube. After heat shrinking the size is 4.9mm(W) x 5.7mm(H) x 40mm(L). The color is clear (transparent).	$1.00 /pc	In Stock	Qty:
	F110112CP	Dia. 4.3mm x 5.1mm x 40mm(L) Single Quartz Strength Member Ribbon Sleeve - Clear Color More Info >> This sleeve is designed for ribbon fibers. It has only one quartz strength member. It has one quartz strength member, an inner ribbon tube and an outer shrink tube. After heat shrinking the size is 4.3mm(W) x 5.1mm(H) x 40mm(L). The color is clear (transparent).	$1.18 /pc	In Stock	Qty:
	MFS	3.0mm(W) x 7.0mm(H) x 40mm(L) MASSsleeve Ribbon Fusion Protection Sleeve More Info >> This 3.0mm(W) x 7.0mm(H) x 40mm(L) MASSsleeve is designed for protection of fused ribbon fibers. It accepts a 2-12 fused ribbon fiber. The sleeve is easy to install and requires no heat shrink, curing, crimping or gluing. It is manufactured with an acrylic foam tape to seal against environmental conditions and improve long term splice reliability. The impact resistant plastic housing has two sections that fold along a hinge.They are delivered in an open position, ready to accept the f.	$2.50 /pc	In Stock	Qty:
	MFSCT	MASSsleeve Closing Tool More Info >> MASSsleeve closing tool is required to install MASSsleeves. The toolÆs soft form holder and alignment pins assure accurate alignment every time. Please check P/N MFS for MASSsleeve ribbon fiber fusion splice protection sleeve.	$967.69	In Stock	Qty: