Corning Cable Systems' Spider Fan-Out Kit is a low-cost termination option for multi-fiber cables. This kit is designed for both factory and field termination of tight-buffered and loose tube non-armored cables with up to 12 fibers.

This kit provides the end-user with a craft-friendly, modular product that enables simple step-by-step assembly for successful installation. Installation of the kit eliminates the need for patch panels at low-cost termination points.

The Spider Fan-Out Kit terminates and provides pull-out protection for bare fibers (250µm). Installation of the product is simple. The cable jacket is stripped back and the fibers are threaded into the modular 6-fiber fan-out inserts. These inserts consist of six 1-meter lengths of fan-out tubing secured in a composite assembly.

The fan-out tubing provides three layers of protection consisting of a Teflon inner tube (into which the fiber is inserted), an aramid yarn strength member and an outer protective PVC jacket (3mm diameter, orange colored). The fan-out insert then snaps into the main spider body. When all the inserts have been loaded, the outer housing is installed to complete the assembly.

Corning® Cable Systems' Spider Fan-Out Kits are designed for both fac­tory or field terminations of distribution or loose tube cables from 4 to 24 fibers. The fan-out tubing provides three layers of protection consisting of a Teflon inner tube, a dielectric strength member and an outer protective PVC jacket.

A multi-piece tubular housing also shields the fan-out insert from physical damage. This re-enterable kit terminates directly to 3mm buffer tubes and requires no special tools or heat shrink.

• Designed for factory and field furcation
• Snap-together fan-out insert
• Dielectric/high-strength, composite material
• Three-layer protective tubing