Corning Infinicor 300 OM1 - 62.5/125/250µm Multimode Optical Fiber
In today's enterprise networks, bandwidth demands are growing - rapidly. That's because end-user productivity is increasingly dependent on instant accessibility and high throughput of information. Narrow bandwidth constricts your capacity to succeed. Corning's 62.5 µm InfiniCor fibers, the world's first laser-optimized 62.5 µm multimode fibers, help you to stay ahead of escalating network demands with:
- Greater distance capability at data rates up to 1 Gb/s in both the 850nm and 1300 nm windows
- Higher data aggregation in the backbone, riser and horizontal, compared with non-laser-optimized fibers
- Full compatibility with the broad range of laser-based and legacy protocols and applications
- Superior measurement technology and manufacturing control
- Industry-leading CPC coating for superior microbend and environmental performance
Corning Infinicor 300 Optical Fiber
|
|
Optimized Date Rate over Distance |
1 Gb/s over 300m at 850nm |
Standards Compliance ISO/IEC 11801 IEC 60793-2-10 TIA/EIA |
Type OM1 fiber Type A1b fiber 492AAAA-A |
Thoroughly Measured for Performance You Can Count On
Corning Fiber is a world leader in developing and using the most advanced measurement techniques for laser optimized multimode fibers. In fact, InfiniCor fibers are more thoroughly measured than any other multimode fiber on the market. Corning uses direct manufacturing process controls and final product measurements for all InfiniCor fibers to ensure performance in laser-based systems.
Corning Fiber provides restricted mode launch (RML) bandwidth measurements for InfiniCor 300 62.5 µm optical fibers. The RML bandwidth metric is a standards-defined method that predicts intermediate-bandwidth, laser-based system performance. Corning was the first optical fiber manufacturer to offer RML measurements for its laser-optimized multimode fibers.
Optical Specifications:
Bandwidth
|
Intermediate Performance EMB* (MHz*km)
|
Legacy Performance EMB** (MHz*km)
|
|
850nm only
|
850nm
|
1300nm
|
|
Infinicor 300 Fiber
|
220
|
200
|
500
|
*RML BW, per TIA/EIA 455-204 and IEC 60793-1-41, for intermediate performance laser-based systems (typically up to 1 Gb/s).
**OFL BW, per TIA/EIA 455-204 and IEC 60793-1-41, for legacy and LED-based systems (typically up to 100 Mb/s).
Attenuation
|
Maximum Value (dB/km)
|
850nm
|
<= 2.9
|
1300nm
|
<= 0.6
|
Attenuation at 1380 nm does not exceed the attenuation at 1300 nm by more than 1.0 dB/km.
Induced attenuation from 100 turns around a 75 mm mandrel shall be 0.5 dB at 850 nm and 1300 nm.
Nµmerical Aperture
0.275 +/- 0.015
Dimensional Specifications:
Glass Geometry
|
|
Core Diameter
|
62.5 +/- 2.5µm
|
Cladding Diameter
|
125.0 +/- 2.0µm
|
Core-Clad Concentricity
|
<= 1.5µm
|
Cladding Non-Circularity
|
<= 1.0%
|
Core Non-Circularity
|
<= 5%
|
Coating Geometry
|
|
Coating Diameter
|
245 +/- 5µm
|
Coating-Cladding Concentricity
|
< 12µm
|
Download Corning Infinicor 300 Optical Fiber Full Spec Sheet