Home > Fiber Optics > Fiber Optic Cable Management > Rack Mount Enclosures

Rack Mount Enclosures

FREE Shipping! (For orders over $150 and ship to continental USA)

Image	Product Code	Description	Price	Stocking	Add to Cart
	CCH-01U	(CCH-01U) Corning Cable System CCH-01 Closet Connector Housings - Holds 2 CCH Connector Panels Corning Cable Systems’ Closet Connector Housings (CCHs) provide interconnect or cross-connect capabilities between the outside plant, riser, or distribution cables, and the opto-electronics. The units can be rack-mounted in 19-in (48 cm) or 23-in (58 cm) equipment racks (1.75-in EIA hole spacing) and occupies one rack space. This unit accepts up to 2 Corning Cable System CCH series connector panels. Documentation labels are provided and units or components can be added as needed to construct a fiber distribution frame for any application. CCH connector panels are not included and must be ordered separately. Features: 1. Ideal for field connectorization 2. Suitable for loose tube, tight-buffered and optical fiber ribbon cables 3. Mounting configurations include standard 4.5-in (11.4 cm) frontal projection, partially flush and flush mount 4. ...	$278.00	In Stock	Qty:
	CCH-04	Corning Cable System CCH-04 Closet Connector Housings - Holds 12 CCH Connector Panels Corning Cable Systems’ Closet Connector Housings (CCH) provide interconnect or cross-connect capabilities between the outside plant, riser, or distribution cables, and the opto-electronics. The unit can be rack-mounted in 19-in (48 cm) or 23-in (58 cm) equipment racks (1.75-in EIA hole spacing) and occupies four-rack-space. This unit accepts up to 12 Corning Cable System CCH series connector panels or modules. Documentation labels are provided and units or components can be added as needed to construct a fiber distribution frame for any application. The CCH has been designed with an open top, located in the front of the housing. The opening, when used in conjunction with the Closet Jumper Management Panel (CJP), facilitates jumper routing. Features: 1. Ideal for field connectorization 2. Includes mounting provisions for buffer tube fan-out kits 3. ...	$390.77	In Stock	Qty:
	CJH-02U	( CJH-02U ) Corning Cable Systems CJH-02U Closet Splice Housings - Accepts Four 0.2 inch Splice Tray CJH-02U is rear-mounted Closet Splice Housing designed to utilize the open space behind the 2U jumper management panel (CJP-02U); accepts up to four 0.2-in splice trays (Type 2R, 2S or 2M) in two rack spaces (3.5 in). Corning Cable SystemsÆ Closet Splice Housings (CSH) are used in equipment racks or equipment cabinets, as well as in the transition splice between outdoor-rated and riser/plenum rated cable at a building entrance. Pigtail splicing is accomplished when the CSH is used in conjunction with the Closet Connector Housing (CCH). Applications: 1. Provides storage and protection of fiber splices in individually accessible trays 2. Rack-mount, 19-in (48 cm) or 23-in (58 cm) for transition splicing between UL-listed and unlisted cable at building entrance or pigtail splicing Features: 1. Cable strain-relief hardware provided including Corning Cable ...	$221.54	In Stock	Qty:
	CJH-03U	( CJH-03U ) Corning Cable Systems CJH-03U Closet Splice Housings - Accepts Nine 0.2 inch Splice Tray CJH-03U is rear-mounted Closet Splice Housing designed to utilize the open space behind the 3U jumper management panel (CJP-03U); accepts up to nine 0.2-in splice trays (Type 2R, 2S or 2M) in three rack spaces (5.25 in). Corning Cable SystemsÆ Closet Splice Housings (CSH) are used in equipment racks or equipment cabinets, as well as in the transition splice between outdoor-rated and riser/plenum rated cable at a building entrance. Pigtail splicing is accomplished when the CSH is used in conjunction with the Closet Connector Housing (CCH). Applications: 1. Provides storage and protection of fiber splices in individually accessible trays 2. Rack-mount, 19-in (48 cm) or 23-in (58 cm) for transition splicing between UL-listed and unlisted cable at building entrance or pigtail splicing Features: 1. Cable strain-relief hardware provided including Corning Cable ...	$267.69	In Stock	Qty:
	CJP-01U	( CJP-01U ) Corning Cable Systems Jumper Management Panel - CJP-01U The jumper management panel is an accessory that facilitates jumper routing in an equipment rack with patch panels and electronics. The jumper management panel is attached to the utility rack directly above or below the equipment. The CJP-01U occupies one rack space. Mounting: Mount the jumper management panel directly above the Closet Connector Housing (CCH) on the equipment rack. Use the 23-inch rack adapter brackets if mounting to a 23-inch equipment rack. If mounting to a 24-inch equipment rack, adapter brackets must be purchased separately (P/N: CDF-01U-24-BKT). Flush-Mounting: Partially flush mounting the CJP will still allow jumpers to route in front of the frame mounting flanges. To partially flush mount the CJP, remove the mounting brackets and re-attach them with the mounting flange flipped from its original orientation. Components: One CJP-01U ...	$80.00	In Stock	Qty:
	CJP-02U	( CJP-02U ) Corning Cable Systems Jumper Management Panel - CJP-02U The jumper management panel is an accessory that facilitates jumper routing in an equipment rack with patch panels and electronics. The jumper management panel is attached to the utility rack directly above or below the equipment. The CJP-02U occupies two rack spaces. Mounting: Mount the jumper management panel directly above the Closet Connector Housing (CCH) on the equipment rack. Use the 23-inch rack adapter brackets if mounting to a 23-inch equipment rack. If mounting to a 24-inch equipment rack, adapter brackets must be purchased separately (P/N: CDF-02U-24-BKT). Flush-Mounting: Partially flush mounting the CJP will still allow jumpers to route in front of the frame mounting flanges. To partially flush mount the CJP, remove the mounting brackets and re-attach them with the mounting flange flipped from its original orientation. Components: One CJP-02U ...	$81.54	In Stock	Qty:
	CSH-03U	( CSH-03U ) Corning Cable Systems CSH-03U Closet Splice Housings - Accepts Twelve 0.2 inch Splice Tr CSH-03U Closet Splice Housing accepts up to twelve 0.2-in splice trays (Type 2R, 2S or 2M) in three rack spaces (5.25 in). Corning Cable Systems’ Closet Splice Housings (CSH) are used in equipment racks or equipment cabinets, as well as in the transition splice between outdoor-rated and riser/plenum rated cable at a building entrance. Pigtail splicing is accomplished when the CSH is used in conjunction with the Closet Connector Housing (CCH). Applications: 1. Provides storage and protection of fiber splices in individually accessible trays 2. Rack-mount, 19-in (48 cm) or 23-in (58 cm) for transition splicing between UL-listed and unlisted cable at building entrance or pigtail splicing Features: 1. Cable strain-relief hardware provided including Corning Cable Systems’ Universal Cable Clamp (UCC) 2. 4.5-in projection or flush-mountable 3. Open-side ...	$259.00	In Stock	Qty:
	CSH-05U	( CSH-05U ) Corning Cable Systems CSH-05U Closet Splice Housings - Accepts Twenty-Two 0.2 inch Splic CSH-05U Closet Splice Housing accepts up to twenty-two 0.2-in splice trays (Type 2R, 2S or 2M) in five rack spaces (8.75 in). Corning Cable SystemsÆ Closet Splice Housings (CSH) are used in equipment racks or equipment cabinets, as well as in the transition splice between outdoor-rated and riser/plenum rated cable at a building entrance. Pigtail splicing is accomplished when the CSH is used in conjunction with the Closet Connector Housing (CCH). Applications: 1. Provides storage and protection of fiber splices in individually accessible trays 2. Rack-mount, 19-in (48 cm) or 23-in (58 cm) for transition splicing between UL-listed and unlisted cable at building entrance or pigtail splicing Features: 1. Cable strain-relief hardware provided including Corning Cable SystemsÆ Universal Cable Clamp (UCC) 2. 4.5-in projection or flush-mountable 3. Open-side ...	$275.38	In Stock	Qty: