The S199M24 from Furukawa is your ultimate splicing solution. It is capable of splicing 24-fiber ribbons, the most popular ribbon for high-count cables.
It is optimized for all major fiber types and manufacturers including SM, MM, DS, NZ-DS, etc.
It is capable of splicing 24, 16, 12, 10, 8, 6, 4, 2, 1 fibers and at the same time achieves 0.03dB loss for single mode fibers.
Specifications:
1. Splicing Method: Clad alignment, fixed V-groove
2. Fiber Types: Ribbon and single fibers, ribbon - 24, 16, 12, 10, 8, 6, 4, 2 fibers
3. Splicing Loss: SM - 0.03dB, NZ-DS - 0.05~0.09dB depends on brand
4. Splicing Time: 48 seconds for 24 fiber ribbons
5. Heating Time: 100 seconds
6. Applicable Fibers: Single Mode - 1, 2, 4, 6, 8, 10, 12, 16, 24; Multimode - 1, 2, 4, 8, 12; DS - 1, 2, 4, 8; NZ-DS (TrueWave and LEAF) - 1, 4, 8, 12, 24; Zero Water Peak Fibers (AllWave and MetroCor) - 1, 2, 4, 6, 8, 10, 12, 16, 24
7. Electrodes: Long electrodes for splicing up to 12 fiber ribbons, short electrodes for splicing 16 fiber and 24 fiber ribbons
8. Splice Memory: 90~100 splices for 24 fiber ribbon splices
9. Coating Diameter: Ribbon - 300um to 400um, Single fibers - 250um, 900um
10. Cladding Diameter: 125um
11. Proof Test Strength: 200gf
12. Dimensions: 6(W) x 6(D) x 6(H) inch
13. Weight: 7.5 lbs
14. Power Supply: 85~264VAC, 50/60Hz; 10~16VDC
15. Operating Conditions: -10°C to 50°C, 0 to 95% humidity, non-condensing
16. Splice Data Output: RS232C
|
 | We are standing by
to help you. Click to chat. |
|
Email A Colleague