This kit provides a solution to protect your mechanical splice especially if the splice is not placed in a splice tray.
This kti includes a metallic protective sleeve and heat shrink tubes. It can accept 3M Fibrlok II (P/N: 2529), AMP Corelink (P/N: F045900), Siemon Ultrasplice (P/N: US-126, US-128) and Corning Cable Systems CamSplice (P/N: 95-000-04).
Instruction:
1. Install the metallic sleeve and shrink tubes onto the fibers being spliced
2. Assemble the mechanical splice as usual
3. Align the protective sleeve and shrink tube to cover the mechanical splice
4. Apply heat to the shrink tubes to fix the metallic sleeve into position.
|
 | We are standing by
to help you. Click to chat. |
|
Email A Colleague