( 49882-SST ) Leviton ST Thread-Lock Connector Single Mode -

APPLICATION

Field termination of singlemode and multimode fiber optic cable.

FEATURES

• Connector may be removed and reused.
• No epoxy or special crimp tools required.
• No heat cure devices required.
• Connector is appropriate for permanent or temporary applications.
• Termination time is approximately 2 minutes.
• Installation instructions and tightening tool are included in each box of 50 connectors.

STANDARDS COMPLIANCE

Meets or exceeds all applicable standards. Complies with TIA/EIA-568-B; and meets FCC Part 68. Meets industry standards for performance and strength.

PHYSICAL SPECIFICATIONS

Fiber Size: Singlemode: 9/125 micron. Multimode: 50/125 micron or 62.5/125 micron
Materials: Body: Nickel plated brass. Ferrule: Pre-radiused zirconia ceramic
Temperature Range: 0/+60 °C
Loss Specification: .2dB typical
Mounting: Bayonet w/ coupling nut

DESIGN CONSIDERATIONS

• Reusable compression type retention-no epoxy or UV curing.
• Multiple mating / fully intermateable.
• Applicable to 3 mm, 900 micron, & 250 micron cable.
• Insertion loss typical at .2dB per mated pair.
• Recommended for indoor use.

Download Leviton ST Thread-Lock connector specification sheet