:: A Little Fiber Optic History Background 1965 – Charles Kao and George Hockham showed that if optical fiber’s attenuation can be reduced to less than 20dB/km, then it can be used as a...Read more »
Fiber Optic Connector
Fiber Optic Connectors Basics, Styles, Trends
:: A Little Fiber Optic History Background 1965 – Charles Kao and George Hockham showed that if optical fiber’s attenuation can be reduced to less than 20dB/km, then it can be used as a...Read more »
Cheetah Splice-On Fiber Connector Installation/Assembly Instructions
The new Cheetah Splice-On Connector (SOC) is the quickest pre-polished factory terminated pigtail to prepare, splice and install. The Cheetah’s 25mm splice protection sleeve is encapsulated and protected by the strain relief boot, eliminating...Read more »
How to Choose the Correct Fiber Optic Connector
You got a fiber cable installation job on hand, great! Now you have to choose the parts for the job, from fiber cable, splice and patch enclosure, to innerduct and everything else....Read more »
Fiber Optic Connector Applications
:: What is the difference between UPC and APC fiber optic connectors ? By definition, the above are acronyms for the following: UPC: Ultra Physical Contact APC: Angled Physical Contact The typical reason for the APC...Read more »
LC Fiber Connector Specifications
You can get LC connectors from Fiber Optics For Sale Co. by clicking the link here: http://www.fiberoptics4sale.com/page/FOFS/CTGY/Fiber_Optic_LC_Connectors :: What are LC Fiber Connectors? LC connector was developed by Lucent Technologies and is a more evolutionary...Read more »
Sumitomo Lynx Splice-On Connector Detailed Installation Instruction
This procedure describes the installation of Sumitomo Lynx CustomFit Splice-On 2mm & 3mm jacket fiber connectors, both UPC polish and APC polish. :: Sumitomo Splice-On Connector Specifications Fiber Type: 9/125um Single mode fiber,...Read more »
LC Connector Installation
We provide quick and easy online ordering of all types of LC Connectors Here are the detailed epoxy LC connector assembly and termination instructions for both single mode and multimode LC connectors. The steps are pretty generic...Read more »
Fiber Optic Connector Coupling Loss versus Light Wavelength
Single mode optical connectors work with both 1310nm and 1550nm, but the coupling loss is very different between these two wavelengths. The loss in decibels at a connector is about 7% greater...
Read more »
Read more »
Can Anaerobic Adhesive Be Used with All Epoxy and Polish Fiber Connectors?
Up until now, the most common curing agent used in fiber optic connector termination is a heat-cured epoxy. The epoxy is injected into the connector, fiber is pushed...Read more »
Fiber Optic Connection Back Reflection
In addition to transmission loss, we also have to consider the back-reflection that occurs at the fiber optic connector interface. Back reflection always happen when there is a change of refractive index. The amount of...
Read more »
Read more »