SHDTU03bA-31T-AD LAN and T1 Extender 2 or 4 wire operation G.SHDSL.bis modem with AC and DC48 power
Note: Price is per unit. Image shows two stacked units for complete understanding on front and back of the modem.
The SHDTU03bA-31T-AD is an exceptional G.shdsl.bis modem designed to simultaneously transport both T1 and Ethernet interfaces over copper wires. Modem can operate in 2 or 4 wire mode, providing either 5.7Mbps (or 11.4Mbps if 4 wire) of bandwidth. G.shdsl.bis is one of most resilient DSL standards, and depending on the quality of the copper circuit it can help extend T1 and Ethernet service up to 5.5 miles away. Modem is using the leading TDM technology in implementing DSL transport and provides mechanism to guarantee bandwidth for the T1 connection while allocation all extra available payload for the Ethernet circuit. The SHDTU03bA-31T-AD has dual redundant power supplies for AC (90-240V) and DC (36-72V) power inputs. Management is available via serial console, IP or the built-in LCD panel and keypad.
|WAN Interface:||ITU G.991.2 (2004) line rate with Trellis Coded Pulse Amplitude Modulation (TC-PAM16 and TC-PAM32) coding and Annex A ,B, F and G support; RJ-45 jack 2 or 4 wire with 135ohms impedance|
|T1 and Ethernet port:||T1 100ohms twisted pairs port 1.544Mbps rate and payload rates up to 5.696Mbps(for 2-wire model) or up to 11.4Mbps
(for 4-wire model)
10/100Base-TX LAN Half/Fullduplex, Auto MDI/MDI-X, 1024 MAC addresses
|Operating distance:||up to 5.5miles on AWG 26 copper wire|
|Front LEDs:||Power, Alarm, Test, SYNC, Error, LBK, E1, Data, Eth|
|Power:||embedded redundant 90-240V AC PS and DC 36-72V|
|Consumption:||< 10 Watt|
|Temperature:||0 - 50°C (Operating); -10 - 70°C (Storage)|
|Humidity:||20 - 80% non condensing (Operating); 0 - 90% (Storage)|
|Dimensions(WxDxH):||165mm x 198mm x 48mm|