{"title":"EDFA Amplifiers","description":null,"products":[{"product_id":"edfa-4123-dwdm-c-band-edfa-booster-23dbm-power-and-23db-max-gain-snmp-managed-1ru-19-rack-mountable","title":"EDFA-4123 DWDM C-Band EDFA Booster, 23dBm power and 23dB max gain, SNMP managed, 1RU 19\" rack mountable","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe EDFA-41 Booster series are the ideal equipment for achieving DWDM telecom long range transmissions or CATV operator network extensions. The Boosters usually install at launch sites, just after the transmitting laser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith an advanced AGC electronics they provide ideal channel gain flatness while covering the whole 45 channels available in the DWDM C Band spectrum. EDFA-41 Booster series features a low power consumption design that provides low thermal dissipation and greater life span of the EDFA pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-41xx Booster series have LCD panel for local management as well as console and Ethernet ports for remote management. SNMP and web management is available on all EDFA series products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEDFA-4123-M4-SCU-DC48 EDFA Booster provides a maximum power of 23dBm and an adjustable gain up to 23dB. It has optical monitoring ports for both IN and OUT active optical ports and is equipped with SC\/UPC connectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DC48V version has DC36~72V power input requirement and can be changed to AC input if required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e45 channels DWDM system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLong distance trunk network\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMAN or access network\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSDH\/PDH transmission system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFTTx PON\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eC-Band operating wavelength: 1529.16~1563.86nm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eexcellent gain flattened feature (GF\u0026lt;1.0dB)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003elow noise figure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarrier-class security and reliability, SNMP and web network management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLCD \u0026amp; LED front panel provide direct status and warning alarms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard RS232 console interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10\/100M Ethernet interface supports SNMP and WEB remote network management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional redundant power supplies supporting hot-swap function\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional configurable optical monitoring ports for input and output ports on booster\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003elow power consumption\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003estandalone or rack mountable 19\" (or optional 23\") for EIA or ETSI rack environment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e The default Booster series configuration include options like monitoring ports for both IN and OUT fiber ports and SC\/UPC optical connectors. The optical monitoring options, power supply configuration and style of optical connectors can be custom ordered. Please contact us by \u003c\/span\u003e\u003ca href=\"mailto:sales@foscoconnect.com\" rel=\"noopener\" target=\"_blank\"\u003ee-mail\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eto discuss such options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional information on EDFA-4123-M4-SCU DWDM C-Band Booster:\u003c\/strong\u003e\u003ca href=\"https:\/\/datainterfaces.com\/content\/edfa-41-series-booster-datasheet.pdf\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/edfa-41-series-booster-datasheet.pdf?v=1742838005\" target=\"_blank\" rel=\"noopener\"\u003eDF Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTC Union","offers":[{"title":"Default Title","offer_id":31932876587106,"sku":"EDFA-4123-M4-SCU-DC48","price":3865.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4123-thin__25144-fotor-20250324105225.png?v=1742838765"},{"product_id":"edfa-41xx-dwdm-c-band-edfa-booster-snmp-managed-1ru-19-rack-mountable","title":"EDFA-41XX DWDM C-Band EDFA Booster SNMP managed, 1RU 19\" rack mountable","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe EDFA-41 Booster series are the ideal equipment for achieving DWDM telecom long range transmissions or CATV operator network extensions. \u003c\/span\u003e\u003cspan\u003eThe Boosters usually install at launch sites, just after the transmitting laser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith an advanced AGC electronics they provide ideal channel gain flatness while covering the whole 45 channels available in the DWDM C Band spectrum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEDFA-41xx Booster series features a low power consumption design that provides low thermal dissipation and greater life span of the EDFA pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-41xx Booster series have LCD panel for local management as well as console and Ethernet ports for remote management. SNMP and web management is available on all EDFA series products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlthough the EDFA-41 booster series can be provided with different levels of maximum signal gain, for simplicity, we are offering EDFA Boosters that provide same level of dBm power as total maximum dB gain.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor instance, EDFA-4120 has a maximum saturation power of 20dBm and provides a maximum signal gain of 20dB. If applications require an EDFA with a lower signal gain, please contact us for a customized quote.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e45 channels DWDM system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLong distance trunk network\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMAN or access network\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSDH\/PDH transmission system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFTTx PON\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eC-Band operating wavelength: 1529.16~1563.86nm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eexcellent gain flattened feature (GF\u0026lt;1.0dB)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003elow noise figure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarrier-class security and reliability, SNMP and web network management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLCD \u0026amp; LED front panel provide direct status and warning alarms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard RS232 console interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10\/100M Ethernet interface supports SNMP and WEB remote network management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional redundant power supplies supporting hot-swap function\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eo\u003c\/span\u003e\u003cspan\u003eptional configurable optical monitoring ports for input and output ports on booster\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003elow power consumption\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003estandalone or rack mountable 19\" (or optional 23\") for EIA or ETSI rack environment\u003c\/span\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eImportant:\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e The default Booster series configuration include options like monitoring ports for both IN and OUT fiber ports and SC\/UPC optical connectors. The optical monitoring options, power supply configuration and style of optical connectors can be custom ordered. Please contact us by \u003c\/span\u003e\u003ca style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\" href=\"mailto:sales@foscoconnect.com\" rel=\"noopener\" target=\"_blank\"\u003ee-mail\u003c\/a\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eto discuss such options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional information on EDFA-41XX C-Band Booster series:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/edfa-41-series-booster-datasheet.pdf?v=1742838005\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/moved-302bb875922f8095f35f73843b514ad8.png\"\u003ePDF Datasheet\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"CTC Union","offers":[{"title":"13","offer_id":41830218498146,"sku":"EDFA-4113-M4-SCU-AD","price":2945.0,"currency_code":"USD","in_stock":true},{"title":"17","offer_id":41830218530914,"sku":"EDFA-4117-M4-SCU-AD","price":3175.0,"currency_code":"USD","in_stock":true},{"title":"20","offer_id":41830218563682,"sku":"EDFA-4120-M4-SCU-AD","price":3290.0,"currency_code":"USD","in_stock":true},{"title":"23","offer_id":41830218596450,"sku":"EDFA-4123-M4-SCU-AD","price":3865.0,"currency_code":"USD","in_stock":true},{"title":"26","offer_id":41830218629218,"sku":"EDFA-4126-M4-SCU-AD","price":5480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4123-thin__78228-fotor-20250324104159.png?v=1742838142"},{"product_id":"edfa-4424a-catv-1550nm-edfa-amplifier-24dbm-total-power-250mw-snmp-managed-1ru-19-rack-mountable","title":"EDFA-4424A CATV 1550nm EDFA Amplifier, 24dBm total power (250mW), SNMP managed, 1RU 19\" rack mountable","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe EDFA-4400A (1RU) series is a high power multi-port optical amplifier operating within 1540~1563nm wavelengths. It is mainly designed for CATV applications, offering a flexible and low-cost solution for large area CATV coverage (medium-sized urban areas). \u003c\/span\u003e\u003cspan\u003eEDFA-4400A optical amplifier is using a top-class pump laser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith perfect APC, ACC and ATC controls, reliable heat control, ventilation and efficient heat-dissipation design, the EDFA unit has all systems in place for an extended MTBF of the laser pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe CATV amplifier model has an extremely low noise figure by using a two-stage optical amplification: the pre-amplifier has a low noise EDFA followed by a high power EYDFA. For example, if input optical power Pin=0dBm, the noise figure of unit is usually ≤4.5dB and not exceeding max value of ≤5.5dB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LCD front panel provides a quick review of all equipment settings and monitors any potential alarms. Laser of the EDFA will switch off automatically if input optical power is missing, offering protection of the laser pump and overall extended life of the equipment. Management is available through local RS-232 console and RJ-45 Ethernet based SNMP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4400A has an optional two-way optical input (with a built-in 2x1 optical switch), for redundant network operation. Considering all reliability and MTBF figures, the EDFA-4400A series are an excellent choice for CATV operators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum output power of the EDFA-4400A series is 5000mW (37dBm) and the total number of ports that can be offered into the 1RU profile of the unit is 32. Model 4424A-1x016 has maximum power of 24dBm with 16 optical output ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAnalog CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDigital CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect Broadcast Satellite \u0026amp; MMDS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFTTx PON\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTotal output power range: 500~5000mW(27~37dBm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003emodel 4424A-1x016 has 16 optical outputs and maximum optical power 24dBm (250mW)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e19’’ 1RU rack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in low noise pre-amplifier, extremely low CNR and MER\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow noise figure ( Typ ≤4.5dB, Max ≤5.5dB )\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReliable console (RS-232) and network 10\/100Base-Tx (RJ-45)SNMP management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTelecom grade safety, reliability and network management.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional dual optical input, built-in 2 × 1 optical switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional redundant power supply, 1+1 backup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent cost\/performance ratio\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional 23\" for EIA or ETSI rack environment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4424A-1x016 CATV amplifier on this page include 16 output fiber ports of equal optical power level, monitoring ports for both IN and OUT fiber ports, redundant DC48V power supplies and SC\/APC optical connectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptions such as power supply configuration, monitoring ports and style of optical connectors can be custom ordered. Please contact us by \u003c\/span\u003e\u003ca href=\"mailto:sales@foscoconnect.com\" target=\"_blank\"\u003ee-mail \u003c\/a\u003e\u003cspan\u003eto discuss such options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional information on EDFA-4424A-1x016-SCA-DD-MO CATV 1550nm Amplifier:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg height=\"16\" width=\"16\" alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" title=\"PDF\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/edfa-44-series-amplifier-datasheet.pdf?v=1742839140\" target=\"_blank\" rel=\"noopener\"\u003ePDF Datasheet\u003c\/a\u003e\u003cspan\u003e; \u003c\/span\u003e\u003cimg height=\"16\" width=\"16\" alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" title=\"PDF\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4429-manual.pdf?v=1742839140\" target=\"_blank\" rel=\"noopener\"\u003ePDF Installation Manual\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"CTC Union","offers":[{"title":"Default Title","offer_id":41830241206370,"sku":"EDFA-4424A-1x016-SCA-DD","price":2650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/4424-1x016__02199-fotor-2025032411029.png?v=1742839247"},{"product_id":"edfa-4429a-catv-1550nm-edfa-amplifier-29dbm-800mwtotal-power-snmp-managed-1ru-19-rack","title":"EDFA-4429A CATV 1550nm EDFA Amplifier, 29dBm (800mW)total power, SNMP managed, 1RU 19\" rack","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe EDFA-4400A (1RU) series is a high power multi-port optical amplifier operating within 1540~1563nm wavelengths. It is mainly designed for CATV applications, offering a flexible and low-cost solution for large area CATV coverage (medium-sized urban areas). EDFA-4400A optical amplifier is using a top-class pump laser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith perfect APC, ACC and ATC controls, reliable heat control, ventilation and efficient heat-dissipation design, the EDFA unit has all systems in place for an extended MTBF of the laser pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe CATV amplifier model has an extremely low noise figure by using a two-stage optical amplification: the pre-amplifier has a low noise EDFA followed by a high power EYDFA. For example, if input optical power Pin=0dBm, the noise figure of unit is usually ≤4.5dB and not exceeding max value of ≤5.5dB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LCD front panel provides a quick review of all equipment settings and monitors any potential alarms. Laser of the EDFA will switch off automatically if input optical power is missing, offering protection of the laser pump and overall extended life of the equipment. Management is available through local RS-232 console and RJ-45 Ethernet based SNMP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4400A has an optional two-way optical input (with a built-in 2x1 optical switch), for redundant network operation. Considering all reliability and MTBF figures, the EDFA-4400A series are an excellent choice for CATV operators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum output power of the EDFA-4400A series is 5000mW (37dBm) and the total number of ports that can be offered into the 1RU profile of the unit is 32.The EDFA-4429A model has a maximum optical power of 29dBm (800mW).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAnalog CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDigital CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect Broadcast Satellite \u0026amp; MMDS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFTTx PON\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e19’’ 1RU rack, model 4429A-1x008 has 8 outputs and total power 29dBm (800mW)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in low noise pre-amplifier, extremely low CNR and MER\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow noise figure ( Typ ≤4.5dB, Max ≤5.5dB )\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReliable console (RS-232) and network 10\/100Base-Tx (RJ-45)SNMP management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTelecom grade safety, reliability and network management.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional dual optical input, built-in 2 × 1 optical switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional redundant power supply, 1+1 backup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent cost\/performance ratio\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional 23\" for EIA or ETSI rack environment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4429A-1x008 CATV amplifier on this page include 8 output fiber ports of equal optical power level, monitoring ports for both IN and OUT fiber ports, redundant DC48V power supplies and SC\/APC optical connectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptions such as power supply configuration, monitoring ports and style of optical connectors can be custom ordered. Please contact us by \u003c\/span\u003e\u003ca href=\"mailto:sales@foscoconnect.com\" rel=\"noopener\" target=\"_blank\"\u003ee-mail \u003c\/a\u003e\u003cspan\u003eto discuss such options.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdditional information on EDFA-4429A-1x008-SCA-DD-MO CATV 1550nm Amplifier:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg title=\"PDF\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" alt=\"\" width=\"16\" height=\"16\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/edfa-44-series-amplifier-datasheet.pdf?v=1742839140\" rel=\"noopener\" target=\"_blank\"\u003ePDF Datasheet\u003c\/a\u003e\u003cspan\u003e; \u003c\/span\u003e\u003cimg title=\"PDF\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" alt=\"\" width=\"16\" height=\"16\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4429-manual.pdf?v=1742839140\" rel=\"noopener\" target=\"_blank\"\u003ePDF Installation Manual\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"CTC Union","offers":[{"title":"Default Title","offer_id":41830248054882,"sku":"EDFA-4429A-1x008-SCA-DD","price":3455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4429A-frontfinal__09611-fotor-20250324111722.png?v=1742840257"},{"product_id":"edfa-4432a-catv-1550nm-edfa-amplifier-32dbm-1550mw-total-power-snmp-managed-1ru-19-rack-mountable","title":"EDFA-4432A CATV 1550nm EDFA Amplifier, 32dBm (1550mW) total power, SNMP managed, 1RU 19\" rack mountable","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe EDFA-4400A (1RU) series is a high power multi-port optical amplifier operating within 1540~1563nm wavelengths. It is mainly designed for CATV applications, offering a flexible and low-cost solution for large area CATV coverage (medium-sized urban areas). EDFA-4400A optical amplifier is using a top-class pump laser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith perfect APC, ACC and ATC controls, reliable heat control, ventilation and efficient heat-dissipation design, the EDFA unit has all systems in place for an extended MTBF of the laser pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe CATV amplifier model has an extremely low noise figure by using a two-stage optical amplification: the pre-amplifier has a low noise EDFA followed by a high power EYDFA. For example, if input optical power Pin=0dBm, the noise figure of unit is usually ≤4.5dB and not exceeding max value of ≤5.5dB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LCD front panel provides a quick review of all equipment settings and monitors any potential alarms. Laser of the EDFA will switch off automatically if input optical power is missing, offering protection of the laser pump and overall extended life of the equipment. Management is available through local RS-232 console and RJ-45 Ethernet based SNMP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4400A has an optional two-way optical input (with a built-in 2x1 optical switch), for redundant network operation. Considering all reliability and MTBF figures, the EDFA-4400A series are an excellent choice for CATV operators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum output power of the EDFA-4400A series is 5000mW (37dBm) and the total number of ports that can be offered into the 1RU profile of the unit is 32. Model 4432A-1x016 has maximum power of 32dBm (1550mW) with 16 optical output ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAnalog CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDigital CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect Broadcast Satellite \u0026amp; MMDS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFTTx PON\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eProduct Features\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003emodel 4432A-1x016 has 16 optical outputs and maximum optical power 32dBm (1550mW)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e19’’ 1RU rack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in low noise pre-amplifier, extremely low CNR and MER\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow noise figure ( Typ ≤4.5dB, Max ≤5.5dB )\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReliable console (RS-232) and network 10\/100Base-Tx (RJ-45)SNMP management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTelecom grade safety, reliability and network management.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional dual optical input, built-in 2 × 1 optical switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional redundant power supply, 1+1 backup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent cost\/performance ratio\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional 23\" for EIA or ETSI rack environment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4432A-1x016 CATV amplifier on this page include 16 output fiber ports of equal optical power level, monitoring ports for both IN and OUT fiber ports, redundant DC48V power supplies and SC\/APC optical connectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptions such as power supply configuration, monitoring ports and style of optical connectors can be custom ordered. Please contact us by \u003c\/span\u003e\u003ca href=\"mailto:sales@foscoconnect.com\" rel=\"noopener\" target=\"_blank\"\u003ee-mail\u003c\/a\u003e\u003cspan\u003e to discuss such options.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdditional information on EDFA-4432A-1x016-SCA-DD-MO CATV 1550nm Amplifier:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg height=\"16\" width=\"16\" alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" title=\"PDF\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/edfa-44-series-amplifier-datasheet.pdf?v=1742839140\" target=\"_blank\" rel=\"noopener\"\u003ePDF Datasheet\u003c\/a\u003e\u003cspan\u003e; \u003c\/span\u003e\u003cimg height=\"16\" width=\"16\" alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" title=\"PDF\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4429-manual.pdf?v=1742839140\" target=\"_blank\" rel=\"noopener\"\u003ePDF Installation Manual\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"CTC Union","offers":[{"title":"Default Title","offer_id":41830284525666,"sku":"EDFA-4432A-1x016-SCA-DD","price":4610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/4424-1x016__54140-fotor-2025032411236.png?v=1742840602"},{"product_id":"edfa-4829a-catv-1550nm-edfa-amplifier-29dbm-800mwtotal-power-with-gpon-support-snmp-2ru-19-rack-mountable","title":"EDFA-4829A CATV 1550nm EDFA Amplifier, 29dBm (800mW)total power with GPON support, SNMP, 2RU 19\" rack mountable","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe EDFA-4800A (2RU) series is a high power multi-port optical amplifier operating within 1540~1563nm wavelengths and supporting PON return path. It is mainly designed for CATV applications with PON service, offering a flexible and low-cost solution for large area CATV coverage (medium-sized urban areas). EDFA-4800A optical amplifier is using a top-class pump laser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith perfect APC, ACC and ATC controls, reliable heat control, ventilation and efficient heat-dissipation design, the EDFA unit has all systems in place for an extended MTBF of the laser pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe CATV amplifier model has an extremely low noise figure by using a two-stage optical amplification: the pre-amplifier has a low noise EDFA followed by a high power EYDFA. For example, if input optical power Pin=0dBm, the noise figure of unit is usually ≤4.5dB and not exceeding max value of ≤5.5dB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LCD front panel provides a quick review of all equipment settings and monitors any potential alarms. Laser of the EDFA will switch off automatically if input optical power is missing, offering protection of the laser pump and overall extended life of the equipment. Management is available through local RS-232 console and RJ-45 Ethernet based SNMP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4800A has an optional two-way optical input (with a built-in 2x1 optical switch), for redundant network operation. Considering all reliability and MTBF figures, the EDFA-4400A series are an excellent choice for CATV operators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum output power of the EDFA-4800A series is 5000mW (37dBm) and the total number of ports that can be offered into the 2RU profile of the unit is 32.The EDFA-4829A model has a maximum optical power of 29dBm (800mW).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAnalog CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDigital CATV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect Broadcast Satellite \u0026amp; MMDS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFTTx PON\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e19’’ 2RU rack, model 4829A-1x016 has 16 outputs and total power 29dBm (800mW)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in low noise pre-amplifier, extremely low CNR and MER\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow noise figure ( Typ ≤4.5dB, Max ≤5.5dB )\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReliable console (RS-232) and network 10\/100Base-Tx (RJ-45)SNMP management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTelecom grade safety, reliability and network management.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional dual optical input, built-in 2 × 1 optical switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional redundant power supply, 1+1 backup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent cost\/performance ratio\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoptional 23\" for EIA or ETSI rack environment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EDFA-4829A-1x016 CATV amplifier on this page include 16 output fiber ports of equal optical power level, monitoring ports for both IN and OUT fiber ports, redundant DC48V power supplies and SC\/APC optical connectors, as well as return path for facilitating PON type deployment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptions such as power supply configuration, monitoring ports and style of optical connectors can be custom ordered. Please contact us by \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"mailto:sales@foscoconnect.com\" target=\"_blank\"\u003ee-mail\u003c\/a\u003e\u003cspan\u003e to discuss such options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional information on EDFA-4829A-1x016-SCA-DD-MO CATV 1550nm Amplifier:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg height=\"16\" width=\"16\" alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" title=\"PDF\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/edfa-44-series-amplifier-datasheet.pdf?v=1742839140\" target=\"_blank\" rel=\"noopener\"\u003ePDF Datasheet\u003c\/a\u003e\u003cspan\u003e; \u003c\/span\u003e\u003cimg height=\"16\" width=\"16\" alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ud26lew7xv\/product_images\/uploaded_images\/pdf.png\" title=\"PDF\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/EDFA-4429-manual.pdf?v=1742839140\" target=\"_blank\" rel=\"noopener\"\u003ePDF Installation Manual\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"CTC Union","offers":[{"title":"Default Title","offer_id":41830311624802,"sku":"EDFA-4829A-1x016-SCA-DD","price":3686.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/4800_series_2RU__52111-fotor-20250324112912.png?v=1742840966"}],"url":"https:\/\/www.fiberoptics4sale.com\/collections\/edfa-amplifier.oembed","provider":"Fosco Connect","version":"1.0","type":"link"}