Modular E1, T1, POTS, Serial and Gigabit Ethernet Fiber Multiplexer wi

Modular E1, T1, POTS, Serial and Gigabit Ethernet Fiber Multiplexer with Redundant Power Slots

CTC Union Part No.: FMUX1001-CH

$ 1,075.00 or

The FMUX1001 is a 1U, 19" rack mountable, PDH fiber optic multiplexer that transmits up to 16 channels plus a 10/100/1000Base-T Gigabit Ethernet channel over a single fiber optic link.

The FMUX1001 chassis supports redundant power and a hot-swappable design. The AC supplies operate from 100~240VAC while DC supplies operate from 18~60VDC.

From the rear of the chassis, one to four hot-swappable quad E1 or T1 line cards, serial data communications (V.35, X.21, RS-530), or FXO/FXS voice cards are supported.

The standard FMUX1001 configuration may be viewed or set via the front panel LCD/menu keys, serial VT-100 terminal connection, Telnet, web HTTP, or SNMP.

Features:

1U, 19 (23)” 4-slot chassis
16 E1 (2.048Mb/s) or 16 T1 (1.544Mb/s) Multiplexer with 100/1000Mbps Ethernet and RS-232 data (async) Interface
RS-232 port for the system console
One alarm output port and one Order Wire port (RJ11 for handset)
4x 10/100/1000Base-T Ethernet ports
SNMP management
LCD plus menu keys for local configuration
Port-based VLAN, tag-based VLAN & bandwidth control
Telnet and web-based remote configuration
2 plug-in SFP slot for optical SFP module
Forward 1024K byte packets on Ethernet port

Technical Specifications:

Optical Interface: SFP slot, data rate 1.25G, Bit Error Rate Less than 10-11
SFP options: fiber MM 62.2/125μm, 50/125μm, SM 9/125μm
SFP max. distance: MM 2km. SM 15/30/50/80/120km, WDM 20/40/60/80km
Electrical Interfaces: Console, SNMP RJ45, Ethernet 4x RJ45, Alarm RJ45
Standards: E1:ITU-T, T1:ITU-T, AT&T, ANSI, Ethernet: IEEE802.3x
LED Indicators: PWR, Alarm, Phone, ACO, Port, Channels
Power Input AC module IN : AC 90 ~ 264V, Out : DC 12V
Power Input DC module IN : DC 18 ~ 72V, Out : DC 12V
Power Consumption < 25W
Dimensions: 250 x 438 x 43mm (D x W x H)
Weight: 3.58 kg
Temperature: 0 ~ 50°C (Operating), 0 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC
MTBF: 50,000 hrs

Additional information on FMUX1001:

Note: To extend POTS phone lines over fiber, both FXO and FXS modules are needed. The FXO module accepts PBX trunk lines and the FXS module connects phone terminal devices (handsets, answering machines, fax machines, modems, etc.)