Cart 0

Gigabit Fiber Gateway w/ 2 telephone FXS ports, WiFi Router and combo copper/SFP up-link for active

CTC Union Part No.: GW532FW

  • $ 235.00 or

Product description
GW532FW is a Gigabit Fiber Gateway designed for Fiber-To-The-Home (FTTH) or ETTH applications. The Gigabit Fiber Gateway provides 1000Mbps of full duplex connection for subscribers through its combo copper/SFP up-link port. The gateway offers 4 Fast Ethernet ports, an integrated VoIP gateway with 2 FXS RJ11 telephone ports running SIP protocol and a router with WiFi Access Point for the local networking. The unit provides very useful mass deployment features like TR-069 support and remote provisioning and management. SIP protocol makes telephony service accessible, being now most used protocol for VoIP based telephony services. There is also an USB port available on the gateway
Product Features

  • Combo copper / SFP slot interface runs 1000Mbps (Gigabit) upstream/downstream on up-link port
  • 4 port Ethernet switch with 10/100 ports and Auto MDI/MDI-X cable detection
  • WiFi IEEE802.11b/g/n 2T2R compatible Access Point with various encryption keys available
  • two RJ11 FXS telephone ports (VoIP based)
  • supports G.711, G.723, G.726, G.729AB, ILBC and BV16 voice CODECs, and T.38 fax standard
  • supports G.168 echo cancellation, Comfort Noise Generation, Voice Activity Detection and Caller ID
  • DTMF tone detection and generation and fax and dial-up modem pass-through support
  • support SIP signaling protocol providing valuable features for telephone lines like: Caller ID, call forwarding, call waiting, call transfer, call busy, call return, CLIP/CLIR and 3 way conference
  • router supports PPP, RIP routing, NAT service and DHCP server/client/relay mode
  • web based management
  • remote firmware upgrade
  • support TR-069 and TR-104
  • USB2.0 host interface

Hardware Technical Specifications

LAN Interfaces: Four RJ45 copper IEEE 802.3u 10/100Base-T, integrated 802.11g WLAN Access Point
WAN interface: combo GE copper/SFP open slot for 1.25Gbps transceivers
Analogue phone interface: 2 FXS RJ11 telephone ports
Front LEDs: PWR, WAN, WLAN, LAN1~4, TEL1, TEL2
Back LEDs: each Ethernet port has link/act LEDs
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0 5°C (Operating); 0 7°C (Storage)
Humidity: 20 80% non condensing (Operating); 0 90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 155mm x 226mm x 29mm
Management: web based, hidden local console for maintenance
Compliance: CE, FCC Class A
MTBF: 57,000 hours

Product Sheet:



Sold Out