Cart 0

3M 2250M-iD Cable/Pipe Locator US Communications 5 watt with EMS-iD Capabilities

3M Part No.: 2250M-IDUC5WRT

  • $ 11,500.00 or

3M Dynatel 2250M-iD Cable/Pipe Locators are microprocessor-based systems that incorporate advanced digital signal processing techniques to quickly and efficiently trace the path of underground cables and pipes, both copper and fiber optic (with metallic tracer wire). They provide accurate cable or Sonde depth measurements, giving a digital readout in inches, feet and inches, or centimeters (user-selectable). Lightweight, compact and well-balanced, these cable/pipe and fault locators allow you to accurately and easily:

1. Locate cable and pipe path
2. Measure cable or Sonde depth with the push of a button
3. Measure signal current in the cable
4. Identify cable and cable pairs
5. Tone shorts and grounds in aerial cable
6. Identify cable pairs through wet sections
7. Locate energized power cable

A new feature exclusive to the 3M Dynatel 2250M-iD Cable/Pipe and Marker Locator is the ability to write, read and lock programmed information into the new 3M 1400 Series EMS iD Ball Markers. Information such as a pre-programmed unique identification number, facility data, owner information, application type, placement date and other details from up to 100 ID markers can all be read, stored with date/time stamp and transmitted back to your PC through a standard RS232 serial port for enhanced resource management.

Designed to be more accurate, faster and more integrated than any other locator on the market, the 3M Dynatel 2250M-iD Cable/Pipe and Marker Locators can perform these additional functions:

1. Pin-point the location and estimate the depth of all existing models of properly installed underground passive EMS markers
2. Direct depth reading of ID markers
3. Locate two different marker frequencies simultaneously
4. Trace a cable path while simultaneously finding buried markers along the way

For cable path locating, the 3M Dynatel Cable/Pipe Locators have a highly accurate multi-antenna design for various user-selected locating modes Directional Peak, Multi-Directional Null, plus an ultra-sensitive Special Peak mode for extreme depths.

The system consists of two basic components:
1. Transmitter with built-in ohmmeter, which also senses and measures the presence of foreign voltage and tests the continuity of the circuit
2. Rugged, one-piece hand-held receiver with bar graph signal strength and direction, that indicates received signal and proximity to the cable; ID versions locate all 3M EMS Markers and read/write to all 3M EMS-iD Markers

Please see the related files download for a specification comparison between 2250M-iD and 2273M-iD locators.


Sold Out