Cart 0
Fluke Networks CableIQ Qualification Tester Advanced IT Kit
Move your mouse over image or click to enlarge

Fluke Networks CableIQ Qualification Tester Advanced IT Kit

Fluke Networks Part No.: CIQ-KIT

  • $ 2,274.00 or

Fluke Networks CableIQ Qualification Tester

The CableIQ Advanced IT Kit is designed to maximize the efficiency of any cable qualification job. Use the included IntelliTone 200 Probe to find cables quickly and definitively, even on active networks. Use the included six smart cable IDs to perform a high volume of qualification tests in a short period of time. Each smart ID has the capability to perform a simple wiremap test or a full qualification test. Up to seven qualification tests can be performed without returning to the patch panel. The rugged carry case can be used to easily port tools from one job to another.

Download Product Spec Sheet:

Fluke CableIQ Qualification Tester Spec Sheet (PDF)

CableIQ Advanced IT Kit Contents:

  • CableIQ main unit with remote adapter
  • CableIQ Reporter software CD
  • IntelliTone 200 Digital Probe
  • Remote IDs #2-7
  • (2x) RJ45-RJ45 patch cord
  • USB cable
  • Coax 'F' push-on adapter
  • 75-ohm coax patch cord
  • RJ45/11 universal coupler
  • RJ11-RJ11 patch cord
  • Owners CD and quick start guide
  • (4x) AA batteries
  • Test accessory soft pouch
  • Hard carry case

Copper qualification tester troubleshoots and qualifies cabling speed (10/100/1000/VoIP)

  • Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
  • Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
  • Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
  • Identifies unused switch ports that can be reallocated
  • Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
  • Tests all copper cabling media: twisted-pair, coax, and audio cabling

The network tech's vision into cabling bandwidth

CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

Reduce escalated problems by as much as 30%

CableIQ's powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active Are the duplex settings matched Is it a network problem or a cable problem Can the cable support the required network bandwidth CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Cable types supported

UTP, STP, FTP, SSTP, RG6, RG59, audio and security

Qualification autotests

1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax

Supported tests

Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.


Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.

Find fault

Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application

Results storage

Up to 250 qualification test results


Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries


20 hours of typical use, without backlight

Other battery types supported

4AA photo lithium, NIHM, NICAD

Dimensions and weight

7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)



Sold Out