Cart 0
Ethernet over Coax LAN Extender, up to 32 units on a coaxial segment, shares cable with CATV signal
Move your mouse over image or click to enlarge

Ethernet over Coax LAN Extender, up to 32 units on a coaxial segment, shares cable with CATV signal

CTC Union Part No.: EOC-10

  • $ 130.00 or

Product description
Ethernet over Coaxial cable (EoCNA) is a technology allowing more than 100Mbps of bandwidth over classic CATV/CCTV coaxial cable. Media can be shared for up to 32 nodes on a single coaxial segment. There is no interference to CATV signal.
112Mbps bandwidth can be attained in a point to point connection on distances of 3000 feet. We provide managed (EOC-20 and EOC-21) and unmanaged (EOC-10) equipment for Ethernet over Coax transmissions.
Applications ofEthernet-over-Coaxinclude Internet access in MDU/MHU (Multi Dwellings or Hospitality Units) where an existing CATV network is in place or on short range outdoor CATV coaxial networks. They are also useful in upgrades of CCTV Surveillance systems to IP based Surveillance, where Ethernet data must be sent over an existing coaxial cable network.
Last, but not least, Ethernet over Coax could be a Home Networking solution, bringing Ethernet to each room of a house over the existing coaxial cabling.
Product Features

  • Extends LAN connectivity using existing coaxial cable
  • Supports CATV and Ethernet over same coaxial cable
  • 112Mbps (PHY speed) @ 900 meters (approx. 3000feet)
  • 32Mbps (PHY speed) @ 1.2Km (approx. 4000feet)
  • supports point-to-point and point-to-multipoint (up to 32 nodes) over taps and splitters on a single coaxial copper cable segment
  • asymmetrical communications using the EoCNA standard
  • transparent to TCP/IP protocol
  • auto MDI/MDI-X function on the RJ45 10/100BaseTx copper interface
  • Plug and Play(no configuration required and no management features)
  • simple LED status monitoring

Hardware Technical Specifications

LAN Interface: One RJ45 copper IEEE 802.3u 10/100Base-TX Fast Ethernet interface
WAN interface: Dual coaxial F type connectors for CATV line and TV set
Transmission Power: 8 +/- 1dBm, 12~28 Mhz Spectrum
Physical layer speed: up to 112Mbps@900 meters

up to 32Mbps@1.2Km (-176dBm/Hz Noise Floor)
LEDs: PWR, LAN Link/Act, Coax Link/Act, Coax Sync
Power: External 90-260V AC switching adapter 5VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0 5°C (Operating); 0 7°C (Storage)
Humidity: 10 90% non condensing
Consumption: 6W
Dimensions(WxDxH): 83mm x 138mm x 28mm
Standard: ITU G.9954, IEEE802.3, IEEE802.3u, IEEE802.3x
Compliance: CE, FCC Class A, RoHS
MTBF: 57,000 hours

Product Sheet:



Sold Out