Cart 0

FRM220-E1-T1R-SC20A FRM220-E1-T1R-SC20A - T1 and E1 RJ45 to single strand WDM BiDi Tx:1310nm/Rx:1550nm fiber media converter (T1 modem), 20Km

Fosco Connect Part No.: FRM220-E1-T1R-SC20A

  • $ 385.00 or

FRM220-E1-T1R-SC20A FRM220-E1-T1R-SC20A - T1 and E1 RJ45 to single strand WDM BiDi Tx:1310nm/Rx:1550nm fiber media converter (T1 modem), 20Km

The FRM220-E1T1R-SC20A is a Bi-Directional fiber media converter for G.703 T1 or E1 (DIP switch selectable)transmission/transport and features an RJ-48c connector for connection to 100 Ohm (or 120Ohms for E1) twisted pair wiring. FRM220-E1T1R-SC20A operates on single strand single-mode fiber up to 20Km (13mi) distance, using WDM technology with Tx:1310nm and Rx:1550nm and must be paired with FRM220-E1-T1R-SC20A model. Versions with ST or FC connectors are available on request.

The new model replaces the old equivalent FIB1-T1R-SC20AF and adds a few extras. The unit is now supporting both T1 and E1 interfaces for transport. A number of DIP switches allow all settings to be made without a PC. The new FRM220-E1T1R supports also local console management when ordered with the FRM220-CH01M-AC optional casing and also can be web managed (besides the SNMP) if installed in any FRM220 serieschassis that has also an FRM220-NMC management card.

The fiber media converter is equipped with single SC type optical connector. Such media converter is also sometimes called T1 fiber modem. Management features provide information on the card status, type, version, fiber link status, E1 or T1 link status and alarms type of alarms. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.
For the BiDirectional modem, an A type converter must be always matched with a B type converter. The models are using complementary wavelengths (1310nm and 1550nm) to communicate over just one strand of fiber.

Fiber power budget according to available BiDirectional single strand models

Model Distance Lambda Min. Output (dBm) Sensitivity (dBm) Power Budget (dB)
FRM220-E1T1R-SC20A 20Km 1310/1550nm -15 -32 17
FRM220-E1T1R-SC20B 20Km 1550/1310nm -18 -32 14


Sechnical specifications

Standards: T1: ITU-T G.703, G.704, G.706, G.732, G.823, AT&T TR-62411, ANSI T1.403
Interfaces: RJ48c 100ohms balanced T1 or RJ48c 120ohms balanced E1 connector and dual SC 155M fiber port
Operating wavelength: Tx:1310nm/Rx:1550n (A type BiDirectional)
Operating distance: 20Km on 9/125um fiber
Optical connector: SC dual type
Front LEDs: Power, Fiber Link, E1/T1 SIG, Test mode
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0~60C (Operating); 0 70C (Storage)
Humidity: 10~90% non condensing
Consumption: less than 5W
Dimensions(WxDxH): 88mm x 155mm x 23mm
Weight: 210g (without AC adapter)
Compliance: CE, FCC Class A, LVD, RoHS
MTBF: 65,000 hours

Product Specification Sheet



Sold Out