Cart 0
Four T1 over IP/Ethernet extender - TDMoverIP - AC power
Move your mouse over image or click to enlarge

Four T1 over IP/Ethernet extender - TDMoverIP - AC power

CTC Union Part No.: IPM-4SE-AC

  • $ 930.00 or

The IPM-4SE-AC unit can send four E1 interfaces over Ethernet using TDMoIP technology. IPM-4SE-AC is available with AC (100-240V) power supply input. There is also a DC48V and AC redundant power supply version available. The IPM-4SE can extend TDM networks using the Internet as transport network. Thus, cost effective solutions are available for deploying highly expensive TDM networks into areas with Internet coverage.

Features of IPM-4SE-AC access unit

  • Supports synchronous TDM services and Ethernet over IP network
  • Offers Ethernet cascading ability to increase the number of TDM interfaces
  • Supports point-to-point E1 over IP network transport
  • Supports clock recovery for the E1 interfaces
  • CLI, Telnet and SNMP management supported, upgradable firmware
  • AC 100-240V power available, power cord supplied in the package

Technical specifications

  • Ethernet connectors: one RJ45 10/100Base-TX uplink port and one RJ45 10/100Base-TX LAN port
  • TDM connectors: E1 RJ45 120ohms, T1 RJ45 100ohms,
  • Framing: Unframed, D4, ESF, PCM30, PCM31
  • Data rate: 1544Kbps / 2048Kbps
  • LEDs: PWR/ TD/ RD/ RTS/ DCD/ T-CLK Loss/ Red Alarm/ Sync Loss/ Yellow Alarm/ Err/ Test
  • Power: AC 100-240V plug
  • Temperature: 0-50§C (Operating), 0 - 70§C (Storage)
  • Humidity: 5%-90% non-condensing
  • Dimensions: 195mm x 235mm x 45mm
  • Weight: 2100g
  • Compliance: ITU-T G.703, G.704, G.706, G.732, G.823
  • MTBF: 57,000 hours

Product Sheet:



Sold Out