Cart 0
MPO Testing and Inspection Kit
Move your mouse over image or click to enlarge

MPO Testing and Inspection Kit

Mooseline Part No.: MFTK1400

  • $ 14,995.00 or

  • Ensures correct end-to-end connectivity of MPO fiber trunks with built-in polarity verification
  • Easy to interpret test results with minimal navigation the user interface displays all 12 fibers
  • No dust caps to manage or lose with a shuttered MPO connector
  • On-board MPO connector eliminates the need for fan-out cords when testing fiber trunks
  • Troubleshoot MPO links and drill down to single fiber test results
  • Automatic scanning and testing of all fibers in MPO connectors with Scan All function
  • MPO adapters
  • 850 Light Source
  • MultiFiber Pro Power Meter
  • Test Cords
  • Carrying case

MultiFiber Pro

MultiFiber Pro Inspection Kit - MFTK1200 with FT600 FiberInspection Pro and NF370 MPO Tip.

Optical Power Meter and Fiber Test Kits
MultiFiber Pro takes the complexity out of testing MPO trunks for loss and polarity. With an on-board MPO connector, it is the first tester to automate the MPO fiber-trunk testing process without using a fan-out cord. The power meter/light source boasts industry-first functions such as automatic scanning of all twelve fibers and display of test results in an easy-to-read bar graph. These innovative features allow MultiFiber Pro kits to eliminate the complexity of testing MPO trunks, making it 90 percent faster than the traditional simplex test methods.

MultiFiber Pro Unique Capabilities

SCAN ALL Function
Scan All function in the MultiFiber Pro Power Meter automatically scans and tests all 12 fibers in MPO connectors taking just 6 seconds to complete all loss or power measurements. This feature automates the testing of MPO terminated fibers and eliminates the time consuming and manual process of moving the tester from fiber to fiber while using fan-out cords.

Built-in Polarity Verification
The simple purpose of any polarity scheme is to provide a continuous connection from the links transmitter to the links receiver. For array connectors, TIA-568-C.0 defines three methods to accomplish this. Deployment mistakes are common because these methods require a combination of patch cords with different polarity types. The polarity measurement of MultiFiber Pro allows the user to test individual patch cords, permanent links, and channels for correct polarity.

On-board MPO connector
The MPO connector on both the Optical Power Meter and Light Source eliminates the use of costly and complicated fan-out cords to test MPO fiber trunks.

Simple User Interface
The MultiFiber Pro simplifies the task of simultaneously presenting polarity, power, and loss results for 12 fibers. The power meter enables the users to easily comprehend the measurement results of 12 fibers simultaneously. The light source identifies each fiber within the MPO connector being tested. Any individual measurements that fail the test limit is identified to allow root-cause analysis. This powerful yet straightforward test set enables everyone to become a fiber testing expert increasing efficiency in testing data center projects.

Select an Individual Fiber
Drilling down to a single fiber during testing and troubleshooting is always a challenge in data centers. MuliFiber Pro can troubleshoot a single fiber within an MPO trunk to provide a single fiber test result. This tincreases MPO connector verification and troubleshooting flexibility with more precise, per-fiber data and reporting.

On-board Shuttered MPO Connector
Uncovered ports can put cabling, equipment and testers at risk for contamination and affect performance. Ensuring a covered connection on your tester can protect it from dirt and dust. MultiFiber Pro makes it easy by shuttering the MPO connector for greater test reliability and peace of mind.

Easy Reporting
The MultiFiber Pro Power Meter stores up to 3,000 test results internally which can be uploaded to a PC using the LinkWare 7 Cable Test Management Software. LinkWare 7 allows you to manage test results, edit cable IDs, print professional reports and even export the data into spreadsheet formats.

Kits for Every Need
MultiFiber Pro is available in several convenient kit configurations to meet all your cleaning, inspection and verification testing needs. Some kits include:

  • Fiber Inspection FiberInspector Pro
    The FiberInspector Pro is the ultimate inspection tool. Its 3.5 screen provides a larger image from its dual magnification probe. The small probe fits in the palm of your hand and can be switched between 250x and 400x magnification with the turn of a dial. The FiberInspector Pro and optional MPO tip complement the MultiFiber Pro test set, provide a comprehensive kit for cleaning, inspection and testing of MPO connected fibers and cassettes.

  • Fiber Cleaning IBC OneClick Cleaners
    Cleaning is critical. Fluke Networks OneClick Cleaners instantly clean fiber opticbulkhead connectors and end-faces. Just push the tool tip to engage cleaning action and pull back on the wheel its that simple. The MPO OneClick Cleaner is bundled with the MultiFiber Pro kits to ensure that you have the best cleaning tool from the beginning.


Sold Out