MSW-4204S-AD 2x 10G SFP+ and 4x Gigabit RJ45 EDD switch (Ethernet Demarcation Device) for Metro Ethernet networks w/ full 802.3ah OAM support (NID), SyncEthernet support, AC and DC power inputs
The next generation Carrier Ethernet Network Interface Device (NID) is designed for business class Ethernet connectivity. The MSW-4204S is equipped with 2 SFP+ slots, dual rate 1G/10Gbps and 4 ports Gigabit RJ45 network interfaces. It can be configured as either UNI or NNI device which are CE(Carrier Ethernet) 2.0 compliant for Metro Ethernet network deployments.
The MSW-4204S is positioned as an universal network interface device (NID) for most carrier Ethernet access applications. It has built-in hardware based Ethernet OAM engine and is compliant to the latest OAM standards to deliver the committed SLA performance KPIs measurement on a per service basis.
Every Ethernet copper or fiber port on MSW-4204S except management port can be configured to deliver the timestamp messages of SyncE or IEEE 1588v2 inside Ethernet packets for the precision time purpose of mobile backhaul network. MSW-4204S is built-in 1PPS/ToD input and output SMA connectors.
The output SMA interface supports the waveform measurement of IEEE 1588v2 via external instrument as well as the input SMA interface can be connected to external time source as the reference clock for the network.
Advanced clock synchronization features for carrier Ethernet network allows operators to deliver time sensitive services with optimal stability and continuity in the end-to-end connectivity.
Highlights
- MEF 9, MEF 14: EPL and EVPL
- Support 16K MAC
- Spanning Tree 802.1D, 802.1s, 802.1w
- Support IEEE 802.1Q tagged VLAN (4K VLAN groups)IEEE 802.1ad QinQ VLAN
Voice VLAN; MAC based VLAN; Protocol based VLAN; - IP subnet based VLAN;Private VLAN for port isolation; VLAN translation;GVRP
- Double VLAN Tagging (C-tag/S-tag) (IEEE 802.1ad)
- support for ISP application
- Various QoS capability (MAC/port/802.1p/Diffserv)
- Port-based rate limiting
- DHCP Snooping
- IGMP Snooping
- IPv6 support
- 802.3x and 802.1x support
- Jumbo frame for up to 10K
-
Extensive OAM support
- IEEE 802.3ah
- IEEE 802.1ag
- ITU-T Y.1731
- RFC2544
- ITU-T Y.1564 - SNMP v1/v2c/v3, Telnet, Web GUI
- SyncE ITU-T G.8261/G.8262/G.8264 on all Ethernet interfaces
- Sync status message support
- IEEE 1588v2 PTP ITU-T G.8263 slave clock
- ITU-T G.8273.2 boundary clock
- ITU-T G.8273.4 transparent clock
- ITU-T G.8265.1/ITU-T G.8275.1 telecom profile
Technical specifications
| Interfaces: | Four RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and two SFP+ slots for 802.3z 100/1000Base- SX/LX/ZX standards |
| Connectors: | 4 x RJ-45 copper 10/100/1000 Mbps and 2 x SFP+ slot 1G/10G, DB9 RS232 serial console for management, 1PPS/ToD port: SMA connector × 2 (input/output) |
| UTP ports: | MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 10Kbytes (Jumbo support) |
| Optical slot: | Small Form Pluggable - supports Auto and Forced mode operation and dual rate 1G and 10G Base-X operation |
| Front LEDs: | FEF, Fiber Link 1, Fiber Link 2, ACT, Link 3, Link 4 |
| Power: | Internal 90-260V AC switching power supply, 3 pin IEC connector C14, AC power cord C13 with US style main plug included in package; DC48V 3 screw block connector |
| Temperature: | 0~50°C (Operating); -20~80°C (Storage) |
| Humidity: | 10~90% non condensing (Operating); 0 90% (Storage) |
| Consumption: | less than 20W |
| Dimensions(WxDxH): | 215mm x 190mm x 44mm |
| Weight: | 780g (without power cord) |
| Compliance: | CE, FCC Class A |
| MTBF: | 85,000 hours |
Additional information on MSW-4204S-AD EDD 10G/Gigabit switch: 
PDF Datasheet.