Menu
Cart 0



ROPMLS-810 - Optical Multimeter - Power Meter, Laser Source and VFL 10mW in one device with internal storage memory and USB connectivity

Fosco Connect Part No.: ROPMLS-810

  • $ 525.00 or



ROPMLS-810 - Optical Multimeter - Power Meter, Laser Source, and VFL 10mW in one device with internal storage memory and USB connectivity

The ROPMLS-810 Optical Multimeter is offering all 3 crucial optical tools in one single device: Optical Power Meter, Optical Laser Source, and Visual Fault Locator. Such a tool allows management and data storage for up to 1000 measurements. The OPM embedded in ROPMLS-810 has a +10 to -70dB sensitivity, the OLS has a stable -6dBm source for all major singlemode wavelengths (1310/1490/1550nm) and the VFL has a solid 10mW power for fiber circuit troubleshooting. ROPMLS-810  has an LCD display and features a USB interface that allows 24/7 measuring with a help of a PC. When used standalone it stores up to 1000 traces in its own internal memory. The Optical Power Meter supports WaveID and can be used in conjunction with our RBOLS-510 Optical Laser Source supplied also by ROBOfiber.

ROPMLS-810 has an orange rubber protective case and the package includes a USB to PC connectivity cable. Three AA batteries are required to operate the power meter, batteries are NOT included. Standard ferrule connector has 2.5mm for the OPM embedded tool suitable for SC, ST, and FC optical connectors. For 1.25mm ferrules, a separate optical ferrule adapter must be purchased.

The ROPMLS-810 is a complete tool that allows measuring active fibers efficiently, being an asset for any fiber professional user.

Features

  • Normal OPM mode and AUTO TEST OPM mode
  • WAVE ID mode and AUTO WAVE ID mode (works with RBOLS-510)
  • Threshold level reading setting (easy reading display for Pass/Fail)
  • Manual calibration and Factory calibration for 850/1300/1310/1490/1550/1625nm wavelengths
  • USB connection for PC data retrieval and 24/7 real-time test run on PC
  • 1000 traces of measurement data storage in internal memory

Product Specification Sheet

Technical Specifications

Model   ROPMLS-810
Display Range 850/1300/1310/1490/1550/1625nm: +10 ~ -70dBm
Accuracy +/- 0.2 dB (at 20 deg. Celsius)
Calibrated Wavelengths   850nm/ 1300nm/ 1310nm/ 1490nm/ 1550nm/ 1625nm (OPM)  
Resolution 0.01dB 
Optical Connector FC & SC & 2.5mm UPP 
Automatic Power Off Idle for 10 minutes or at Low battery warning
Data Capacity 1000 traces 
Laser Source Power min. -6dBm @ 1310nm/1490nm/1550nm
Laser Stability +/-0.05dB over 1 hour; +/-0.1dB over 8 hours
Modulation 270Hz, 1KHz, 2KHz
Wave ID Supported (can be matched with RBOLS-510 optical source) 
VFL Mode Continuous/Glint 2Hz
VFL Power 10mW/ 2.5mm UPP connector
Data Interface USB 2.0
Real-Time Monitoring Internal 1 Min / 0.5s interval, 24/7 with connected PC
Battery Life AA x 3, 20+ hours of operation (batteries NOT included)
Power supply AA x 3 or USB cable 5V, 500mA
Size 170mm * 97mm * 38mm 
Weight 380g without batteries
Storage Temperature -20~+60 Celsius, humidity<90% non-condensing
Operating Temperature -10~+50 Celsius, humidity<90% non-condensing 
Warranty 2 years
Sale

Unavailable

Sold Out