The FRM220-10-100IS Fast Ethernet fiber media converter is a 10/100Base-TX to 100Base-X open SFP slot converter card. When used with the NMC card unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. Remotely connected converters can be managed in-band over the fiber. Up to 8 big FRM220-CH20 chassis can be controlled with a single management card.

The FRM220 series converters are extremely versatile, being available in several versions of power supply: external AC adapter,embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-10-100IS Fast Ethernet media converter is a very powerful choice for media converter solution for data carriers and service providers.

Technical specifications

Interfaces:	One RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX and one 100Base-X SFP slot fiber port for 802.3u standard
Connectors:	One RJ-45 copper 10/100 Mbps and one SFP port 100Base-X
UTP port:	MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 2046 bytes - switch/ 9K bytes - converter
Optical slot:	universal SFP slot 155M (open)
Front LEDs:	Power, FEF, FX-Link, TX-SPD, Tx-Duplex, Tx-Link
Power:	External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0-60°C (Operating); -10-70°C (Storage)
Humidity:	10 90% non condensing
Consumption:	less than 4W
Dimensions(WxDxH):	88mm x 155mm x 23mm
Weight:	340g (without AC adapter)
Compliance:	CE, FCC Class A, LVD, RoHS
MTBF:	65,000 hours

PDF Datasheet; PDF Installation Manual.

Note: This converter does NOT come with the SFP.