Features:

• The Fluke Networks NFC-Swabs-2.5mm features 50 SC and ST 2.5-mm Port Cleaning Swabs.
• Lint-free material enables optimal wet/dry cleaning sequence.
• Use them with solvent to ensure all fiber end-faces are clean before every mating.
• This combination eliminates contamination and fiber link failure.
• Swabs may be used with the NFC-Cube Cleaning Cube with Wipes.
• After pulling a clean wipe from cube, apply a small spot of solvent to starting edge of wipe.
• Touch swab to wet spot on wipe for 3 seconds to absorb a minimal amount of solvent.
• A damp swab works better than a wet one.
• Applying solvent from pen directly to swab would use excessive solvent. Insert swab into port and turn several times while applying gentle pressure.
• Follow damp swab with dry one, using same procedure to remove any remaining solvent from end-face and alignment sleeve.

Product Sheet:

• Spec Sheet