Features:

• Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan.
• Round trip delay of only 40 bit timesfar below the Class II rating of 92 bit times.
• Auto-Negotiation (802.3u)
• Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
• AutoCross
• Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
• Link Pass Through
• Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
• Far End Fault (FEF)
• A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
• Automatic Link Restoration
• Transition Networks's converters will automatically re-establish link in all network conditions.
• Pause (IEEE 802.3xy)
• Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
• The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.

Multimode

• Min TX PWR: -19.0 dBm
• Max TX PWR: -14.0 dBm
• RX Sensitivity: -30.0 dBm
• Max In PWR: -14.0 dBm
• Link Budget: 11.00 dB

Switches

• SW1: Auto-Negotiation On/Off
• SW2: Pause TX On/Off
• SW3: Link Pass Through On/Off
• SW4: Far End Fault On/Off

Dimensions

• Width: 3.0" [76 mm]
• Depth: 4.7" [119 mm]
• Height: 1.0" [25 mm]

Environment

• 0 5°C, 5% 95% humidity non-condensing, 0 10,000 ft. altitude

Product Sheet:

• Spec Sheet