SP-POE-01 is an in-line RJ45 Ethernet Cat6 cable surge protector. It installs simply on a Cat5, Cat 5e or Cat6 4 twisted pair cable.

Features:

• Device is using special diodes and gas discharge modules for effective lightning protection.
• It protects any RJ45 Ethernet based device like switches, DSL modems, routers, computers, etc.
• The Ethernet surge protector is also available in special multi-port version with 8, 16 or 24 surge protecting ports.
• The 8 pin surge protector is also good for RJ48c 100ohm T1 interfaces, providing effective surge protection on all 8 pin connectors from the T1 copper interface.
• Fast energy absorption on over-voltage
• Low resistance and minimal capacitance - minimal influence on data link
• Easy in-line installation: two RJ45 female connectors

Note:

• This special surge protector version does SUPPORT the IEEE 802.3af PoE standard (Power over Ethernet).You can use such protector on PoE active cabling.
• The compatibility is assured with the IEEE 802.3af standard by supporting a much higher clamping voltage of 53V.

Technical specifications

• Discharge current max.: 5KA
• Discharge current nominal: 0.5KA
• Max. voltage: 6.8V Data (pins 1,2,3 and 6) and 53V PoE (pins 4,5,7 and 8)
• Response time: line-line<1ns, line-ground<100ns
• Insertion loss: <0.5dB (100MHz)
• Capacity: 40pF
• Dimensions: 106.2mm x 37.6mm x 25.6mm
• Weight: 75g

Product Sheet:

• Datasheet