Cart 0

SC, ST, 2.5mm port cleaning swabs (50 count)

TE Connectivity Part No.: NFC-SWABS-2_5MM

  • $ 52.95 or


  • The Fluke Networks NFC-Swabs-2.5mm features 50 SC and ST 2.5-mm Port Cleaning Swabs.
  • Lint-free material enables optimal wet/dry cleaning sequence.
  • Use them with solvent to ensure all fiber end-faces are clean before every mating.
  • This combination eliminates contamination and fiber link failure.
  • Swabs may be used with the NFC-Cube Cleaning Cube with Wipes.
  • After pulling a clean wipe from cube, apply a small spot of solvent to starting edge of wipe.
  • Touch swab to wet spot on wipe for 3 seconds to absorb a minimal amount of solvent.
  • A damp swab works better than a wet one.
  • Applying solvent from pen directly to swab would use excessive solvent. Insert swab into port and turn several times while applying gentle pressure.
  • Follow damp swab with dry one, using same procedure to remove any remaining solvent from end-face and alignment sleeve.

Product Sheet:



Sold Out