sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The 3M SC Hot Melt Connector for 125µm multimode fiber provides a fast, field-installable solution for network termination. Designed to streamline fiber connectivity, these connectors utilize an advanced internal adhesive technology that removes the need for liquid epoxy or lengthy curing times.
These connectors are suitable for a variety of field environments, offering the ability to re-heat the connector for fiber repositioning if necessary. This capability helps reduce waste and ensures successful terminations during installation. The SC interface is ideal for standard data and telecommunications network applications requiring efficient, repeatable performance.
Key Features
-
Rapid Termination
Capable of being terminated in 2 minutes or less, increasing installation efficiency. -
Advanced Adhesive Technology
Pre-loaded adhesive eliminates the need for messy liquid epoxies. -
Re-heatable Design
Allows for fiber repositioning after initial termination to correct mistakes. -
Typical Insertion Loss
Provides a reliable typical loss of 0.2dB for consistent signal integrity. -
Multimode Compatibility
Optimized for 125µm multimode fiber applications. -
Standard SC Interface
Industry-standard form factor for broad hardware compatibility.
Applications
- Local Area Networks (LAN)
- Wide Area Networks (WAN)
- Data Centers
- Field Repair and Maintenance
- Fiber-to-the-Desk installations
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | 3M |
| Connector Type | SC |
| Fiber Type | Multimode |
| Fiber Size | 125µm |
| Typical Insertion Loss | 0.2dB |
| Termination Time | 2 minutes or less |
| Epoxy Required | No |
Frequently Asked Questions
Does this connector require epoxy?
No, these connectors feature an advanced pre-loaded adhesive that does not require separate liquid epoxy.
How long does it take to terminate?
The connector can typically be terminated in 2 minutes or less.
Can I reposition the fiber after installation?
Yes, the connector is re-heatable, which allows you to reposition the fiber if needed during the termination process.
What is the typical insertion loss for this connector?
The typical insertion loss for this connector is 0.2dB.
Is this connector compatible with singlemode fiber?
This specific part number is designed for multimode 125µm fiber. Please verify your fiber type before ordering.
Downloads