Cart 0
Fluke Networks CableIQ Residential Qualification Tester
Move your mouse over image or click to enlarge

Fluke Networks CableIQ Residential Qualification Tester

Fluke Networks Part No.: CIQ100

  • $ 1,620.00 or

CIQ100 CableIQ Residential Qualification Tester Contents:

  • CableIQ with remote adapter
  • CableIQ Reporter software CD
  • (2x) RJ45-RJ45 patch cord
  • USB cable
  • Coax 'F' push-on adapter
  • Owners CD and quick start guide
  • (4x) AA batteries
  • Soft carry case

Copper qualification tester qualifies and documents residential cabling system quality.

  • Documents that residential cabling systems are defect-free and TIA-570B compliant
  • Qualifies residential cabling systems to support voice, VoIP, 10/100/1000 Ethernet, and CATV
  • Graphically maps wiring systems and shows distance to faults with built-in TDR
  • Tests and troubleshoots all low-voltage residential wiring:
    - Coax Cables
    - Telephone Wire
    - Security Wire
    - Speaker Wire
  • Locates and traces cables with IntelliToneTM digital signaling technology

Complete residential cable testing and documentation

CableIQ is the first qualification tester designed for residential installers who need to document that cabling systems are installed properly and will perform reliably. It quickly qualifies residential cabling systems to support voice, VoIP, 10/100/1000 Ethernet, and CATV, and presents results in the form of professional test reports.

Designed especially with the residential installer in mind, CableIQ is versatile and intuitive enough to replace multiple tools for testing, ID-tagging, and troubleshooting all voice, data, video, audio, and security cabling.

Virtually eliminate callbacks and workmanship disputes

Callbacks are expensive, and avoiding them is money in your pocket. Ensuring that installations meet TIA-570B standards for quality allows you to virtually eliminate these expensive callbacks, and recover your investment fast.

Workmanship disputes are costly and reduce the credibility of installers and builders alike. Professional test reports generated by CableIQ Reporter definitely prove the cause of cabling failures and make disputes a thing of the past.

Cable types supported

UTP, STP, FTP, SSTP, RG6, RG59, audio and security

Qualification autotests

1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax

Supported tests

Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.


Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.

Find fault

Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application

Results storage

Up to 250 qualification test results


Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries

Battery life

20 hours of typical use, without backlight

Other battery types supported

4 AA photo lithium, NIHM, NICAD

Dimensions and weight

7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)



Sold Out