sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The Divot DVT-S5 Bare Fiber Adapter is a specialized testing tool designed for rapid connection to unterminated single mode fibers. It enables technicians and network engineers to perform essential testing or servicing tasks without requiring a permanent connector, ensuring efficient workflow in data centers and field environments.
Constructed for ease of use, this adapter features the universal LiteLOCK interface and internal optical coupling compound (OCC) cartridge technology. The module is fully reusable, allowing for simple disassembly and maintenance. It is an effective solution for temporary signal injection or power measurements on bare, unterminated fiber optics.
Key Features
-
Quick Fiber Connection
Designed for fast termination-free fiber testing, reducing setup time in the field. -
High Optical Performance
Provides a typical insertion loss of <0.5 dB for cleaved fiber and <0.8 dB for non-cleaved fiber, ensuring accurate test results. -
Integrated Coupling Compound
Equipped with an optical coupling compound (OCC) cartridge that supports over 500 insertions without requiring messy manual application. -
Replaceable Cartridge System
The modular design allows for quick replacement of the internal OCC cartridge using the provided spare, extending the device's service life. -
LiteLOCK Interface
Utilizes the universal LiteLOCK system for secure and easy assembly/disassembly during maintenance. -
Portable Kit Configuration
Supplied with essential accessories including a carry case and cleaning tools, making it ready for field deployment.
Applications
- Temporary fiber optic testing
- Signal troubleshooting and maintenance
- Power level measurements
- Data center fiber auditing
Package Contents
- Divot DVT-S5 Bare Fiber Testing Device
- SC/APC Single Mode Patch Cable
- 2 x OCC Cartridges
- Dust Cap
- Vial of Clean-out Wire
- Instruction Sheet
- Carry Case
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Divot |
| Model | DVT-S5 |
| Part Number | 722X205 |
| Connector Type | SC/APC |
| Fiber Mode | Single Mode |
| Insertion Loss (Cleaved) | <0.5 dB |
| Insertion Loss (Non-cleaved) | <0.8 dB |
| Cartridge Life | 500+ insertions |
Frequently Asked Questions
What fibers can I test with this device?
The DVT-S5 is optimized for single mode bare fiber testing with an SC/APC connector interface.
Do I need to apply gel manually?
No, the device utilizes an integrated OCC cartridge, eliminating the need for messy gel applicators or external reservoirs.
How long do the cartridges last?
Each cartridge is rated for 500+ insertions. Two cartridges are included in the kit.
How much fiber do I need to prepare?
You should strip and clean approximately 3/4 inch of bare 125µm fiber for successful insertion.
Is the module reusable?
Yes, the module is designed with the LiteLOCK interface for easy disassembly and reuse.