sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP LC/APC to LC/APC single mode patch cable is a high-performance, simplex fiber jumper designed for telecommunications and data center environments. This cable features bend-insensitive ITU-T G.657.A1 fiber, allowing for tighter routing and management in confined spaces without degrading signal performance.
Engineered for precision, this patch cable utilizes angle-polished (APC) connectors to minimize back reflection, making it ideal for high-bandwidth applications that require low signal loss. The 2.0mm PVC jacket provides a durable protective exterior for routine handling and installation.
Key Features
-
Bend-Insensitive Fiber
Compliant with ITU-T G.657.A1 standards to maintain signal integrity even with a minimum bending radius of 10 mm. -
Angle-Polished Connectors
LC/APC connectors provide superior return loss performance, reducing back reflections in sensitive optical networks. -
High Precision Testing
Each cable is 100% optically tested for insertion loss and return loss to ensure consistent network performance. -
Low Insertion Loss
Designed for efficient signal transmission with an insertion loss rating of <0.3 dB. -
Minimal Back Reflectance
Features high return loss performance of >65 dB, critical for minimizing noise in high-speed data transmission. -
Robust Jacket
Equipped with a 2.0mm PVC jacket suitable for standard indoor cabling requirements.
Applications
- Telecommunications infrastructure
- Data center cross-connects
- Fiber-to-the-Home (FTTH) installations
- High-speed enterprise networks
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | FiberXP |
| Part Number | 682X465 |
| Model | PCAA3SSP001-BI |
| Fiber Type | Single Mode, Bend-Insensitive (G.657.A1) |
| Connector A | LC/APC |
| Connector B | LC/APC |
| Cable Configuration | Simplex |
| Length | 1 Meter |
| Jacket Material | PVC |
| Jacket Diameter | 2.0 mm |
| Insertion Loss | < 0.3 dB |
| Return Loss | > 65 dB |
Frequently Asked Questions
What is the benefit of APC connectors?
APC (Angled Physical Contact) connectors are polished at an 8-degree angle, which reduces back reflection (return loss) by directing reflected light into the cladding rather than back toward the source.
Is this cable compatible with standard single mode fiber?
Yes, this G.657.A1 bend-insensitive cable is fully compatible with standard G.652 single mode fiber networks.
Can this cable be used outdoors?
This cable features a standard PVC jacket intended for indoor use. Outdoor applications typically require a UV-rated or armored cable jacket.
Does "simplex" mean it is for one-way traffic only?
Simplex cables contain a single strand of fiber, which can support both transmit and receive signals in a single-fiber WDM (wavelength division multiplexing) system, or one direction in a standard pair-based system.
What is the minimum bend radius?
The bend-insensitive design allows for a minimum bending radius of 10 mm, helping prevent signal loss in tight equipment enclosures.