sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP LC to LC single mode fiber optic patch cable is a duplex, bend-insensitive jumper designed for demanding networking environments. This cable features ITU-T G.657.A1 fiber, providing enhanced performance in tight routing scenarios where standard fiber might suffer from signal degradation due to bending.
Constructed with a 2.0mm PVC jacket, this duplex patch cable ensures durability for internal network rack and data center infrastructure. The connectors are terminated with LC/UPC ultra-polished finishes to provide a reliable signal path. Each cable is 100% optically tested to guarantee performance standards, making it suitable for high-speed voice, video, and data applications.
Key Features
-
Bend-Insensitive Fiber
Features ITU-T G.657.A1 fiber, allowing for a minimum bending radius of 10 mm without signal loss. -
LC/UPC Connectors
Equipped with ultra-polished LC connectors that ensure high-quality, low-reflectance connections. -
Duplex Configuration
Designed for bidirectional transmission, supporting simultaneous data flow in a compact 2.0mm profile. -
Low Insertion Loss
Maintains an insertion loss of less than 0.3dB to preserve signal integrity across the link. -
High Return Loss
Provides a return loss of greater than 55dB to minimize back reflectance in sensitive systems. -
Pre-Tested Quality
Every jumper is 100% optically tested before shipment to verify compliance with technical specifications.
Applications
- Data centers
- Enterprise networks
- Fiber to the Home (FTTH)
- Telecommunications infrastructure
- High-density cable management
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | FiberXP |
| Model | PCGG3DSP006-BI |
| Connector Type | LC to LC |
| Polish | UPC (Ultra Polished) |
| Fiber Type | Single Mode, Bend-Insensitive (ITU-T G.657.A1) |
| Configuration | Duplex |
| Cable Length | 6 meters |
| Jacket Material | PVC |
| Jacket Diameter | 2.0mm |
| Insertion Loss | <0.3dB |
| Return Loss | >55dB |
| Minimum Bending Radius | 10 mm |
Frequently Asked Questions
What does BI stand for?
BI stands for Bend-Insensitive. This means the fiber is designed to maintain signal integrity even when routed around tight corners or in constrained spaces.
Is this cable compatible with standard single mode fiber?
Yes, this G.657.A1 fiber is fully compatible with standard G.652 single mode fiber infrastructures.
Does this come with a test report?
The product is 100% optically tested for loss and reflectance, ensuring it meets performance specifications upon delivery.
Can this be used in outdoor environments?
This cable is specified with a PVC jacket and is designed for internal/indoor applications.
What is the difference between UPC and APC?
This cable uses UPC (Ultra Polished Connector) which has a flat/rounded end-face polish, typically color-coded blue, which is different from the angled physical contact (APC) polish used in specific high-reflectance applications.