sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP LC to SC single mode fiber optic patch cable is a duplex jumper designed for high-performance network connectivity. This cable utilizes bend-insensitive fiber technology, featuring a minimum bending radius of 10 mm, which allows for installation in tight spaces without compromising signal integrity.
Constructed with a durable 2.0mm PVC jacket, this cable is suitable for standard indoor data center and telecommunications environments. Each assembly is 100% optically tested to ensure consistent performance, featuring ultra-polished (UPC) connectors for reduced signal degradation.
Key Features
-
Bend Insensitive Fiber
Features a 10 mm minimum bending radius, reducing signal loss in constrained installation areas. -
Duplex Configuration
Provides dual-fiber connectivity for simultaneous transmit and receive operations. -
Low Insertion Loss
Maintains an insertion loss of <0.3dB, ensuring high signal strength across the connection. -
High Return Loss
Delivers >55dB return loss, minimizing back reflections for better network stability. -
Standardized UPC Polish
Equipped with LC/UPC and SC/UPC connectors for reliable, industry-standard physical contact. -
Durable Jacket
Features a 2.0mm PVC outer jacket for physical protection during routing. -
100% Optically Tested
Each cable undergoes verification to guarantee performance out of the box.
Applications
- Data Center Interconnects
- Enterprise Networking
- Telecommunications Infrastructure
- Fiber-to-the-Desk (FTTD)
- Patch Panel Cross-Connects
Technical Specifications
| Specification | Value |
|---|---|
| Model | PCGF3DSP007-BI |
| Part Number | 682X136 |
| Connector A | LC/UPC |
| Connector B | SC/UPC |
| Fiber Type | Single Mode |
| Fiber Mode | Bend Insensitive (G.657.A1) |
| Duplex/Simplex | Duplex |
| Insertion Loss | <0.3dB |
| Return Loss | >55dB |
| Cable Length | 7 meters |
| Jacket Material | PVC |
| Cable Diameter | 2.0mm |
| Minimum Bending Radius | 10 mm |
Frequently Asked Questions
What does BI mean in the product title?
BI stands for Bend Insensitive. It indicates the fiber cable is designed to maintain signal integrity even when bent at tighter radii than standard single mode fiber.
Is this cable suitable for outdoor use?
No, this cable features a PVC jacket intended for indoor applications.
What is the polish type of these connectors?
The connectors use a UPC (Ultra-Polished Connector) finish.
Can I use this for high-speed data transmission?
Yes, as a standard single mode patch cable, it is suitable for various high-speed data and telecommunication network applications.
What is the fiber standard used in this cable?
This cable utilizes ITU-T G.657.A1 fiber.