sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP® MTRJ to ST multimode fiber optic patch cable is a duplex jumper designed for reliable signal transmission in high-speed data networks. Featuring 62.5-micron core fiber, this cable is optimized for short-to-medium distance communication applications. It is constructed with a durable 2.0mm PVC jacket to protect the internal fiber strands during installation and routing within data centers or enterprise environments.
Engineered for consistent network performance, this patch cord utilizes physical contact (PC) connectors to ensure low signal loss and effective light coupling. Every cable is factory-tested for insertion loss and back reflection, providing a dependable solution for patching between networking equipment such as switches, servers, and distribution panels.
Key Features
-
Duplex Configuration
Features two fiber strands for simultaneous bidirectional data transmission. -
Standardized Connectors
Equipped with MTRJ and ST PC connectors for broad compatibility with legacy and enterprise networking hardware. -
62.5-Micron Multimode Fiber
Designed for OM1 multimode applications, supporting standard data rates at shorter distances. -
Durable 2.0mm Jacket
Robust PVC outer sheath provides physical protection for the fiber core in office and data center environments. -
Factory Tested
100% optically tested for insertion loss and back reflection to ensure connection integrity. -
Precise Length
Factory-terminated at a 2-meter length to minimize excess cable slack in racks.
Applications
- Data center interconnects
- Enterprise LAN networking
- Telecommunications distribution
- Patch panel to active equipment connectivity
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 682X622 |
| Model | PC713DMP002 |
| Connector A | MTRJ |
| Connector B | ST |
| Fiber Type | Multimode (62.5-micron) |
| Cable Type | Duplex |
| Cable Length | 2 Meter |
| Jacket Material | PVC |
| Jacket Diameter | 2.0mm |
Frequently Asked Questions
What does the duplex configuration mean?
Duplex means the cable contains two strands of fiber, allowing for simultaneous transmit and receive functions required by most networking protocols.
Is this cable compatible with high-speed 10G networks?
This is a 62.5-micron multimode fiber (OM1), which is typically used for older or lower-bandwidth legacy applications. It is generally not recommended for modern 10Gbps or higher data rate installations.
Can I use this for outdoor applications?
No, this cable features a standard PVC jacket intended for indoor data center or office use. It is not rated for outdoor exposure or direct burial.
What is the purpose of the PC polish?
PC (Physical Contact) polish ensures that the fiber end-faces touch directly when connected, which minimizes signal loss compared to air-gap connectors.
Is this TAA compliant?
No, this item is explicitly listed as Non-TAA Compliant.