sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP SC/APC to SC/APC single-mode fiber optic patch cable is a duplex jumper designed for high-precision optical networking. Engineered for applications requiring low back reflection, this cable features angle-polished (APC) connectors to minimize signal return loss.
Constructed with a durable 2.8mm PVC jacket, this patch cable is suitable for standard indoor data center environments and equipment interconnects. Each unit is factory-tested to ensure performance standards for insertion loss and reflectance, providing a dependable interface for critical fiber links.
Key Features
-
Angle-Polished Connectors
SC/APC connectors provide superior return loss performance compared to standard UPC connectors, ideal for sensitive high-speed applications. -
Duplex Configuration
Two-fiber design allows for bidirectional data transmission, streamlining installation in dual-channel network setups. -
Factory Tested
Each cable is individually tested for insertion loss and back reflection to ensure operational consistency. -
Robust 2.8mm Jacket
Features a 2.8mm PVC outer jacket providing protection against mechanical stress during routing. -
Single-Mode Fiber
Optimized for long-distance, high-bandwidth signal transmission in telecommunications and data networks. -
Standard Length
Precise 5-meter length ensures uniform deployment across patch panels and rack-mounted equipment.
Applications
- Telecommunications networks
- Data center interconnections
- FTTH (Fiber to the Home)
- CATV systems
- Passive optical networks (PON)
Technical Specifications
| Specification | Value |
|---|---|
| Model | PC553DS005 |
| Connector A | SC/APC |
| Connector B | SC/APC |
| Fiber Mode | Single Mode |
| Fiber Count | Duplex |
| Cable Length | 5m |
| Jacket Material | PVC |
| Cable Diameter | 2.8mm |
Frequently Asked Questions
What does the APC polish mean?
APC stands for Angled Physical Contact. The connector end-face is polished at an 8-degree angle to significantly reduce back reflection by reflecting light into the cladding instead of back toward the source.
Can this be used with standard SC/UPC ports?
No. SC/APC and SC/UPC connectors are not physically compatible. The angled end-face of an APC connector will not mate properly with a flat UPC connector.
Is this cable suitable for outdoor use?
This cable is typically intended for indoor use. The PVC jacket is not rated for prolonged direct UV exposure or harsh outdoor environmental conditions.
What is the purpose of the duplex configuration?
Duplex cabling provides two separate fibers, allowing for simultaneous transmit and receive signals in network links.
Are these cables tested?
Yes, each patch cable is 100% optically tested for insertion loss and back reflection before shipping.