sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP SC to SC single mode fiber optic patch cable is a duplex jumper designed for high-performance network connectivity. This cable utilizes bend-insensitive fiber (G.657.A1), allowing for a tighter 10mm minimum bend radius, which makes it ideal for dense environments where cable management space is constrained.
Constructed with a durable 2.8mm PVC jacket, this duplex patch cord is suitable for standard indoor operating environments. Each assembly is 100% optically tested to ensure consistent signal integrity and minimal signal degradation in critical data links.
Key Features
-
Bend-Insensitive Fiber
Features a minimum bend radius of 10mm, reducing signal loss caused by tight bends in cable trays or enclosures. -
Duplex Configuration
Provides two-way communication capability suitable for standard transmit/receive applications. -
SC/UPC Connectors
Terminated with industry-standard SC ultra-polished connectors for reliable physical contact and low reflectance. -
Durable Jacket
Equipped with a 2.8mm PVC outer jacket for robust protection of the internal fiber strands during installation. -
Low Insertion Loss
Engineered with an insertion loss of <0.3dB to maximize power budget in high-speed networks. -
High Return Loss
Features a return loss of >55dB to minimize back reflectance and protect laser sources. -
Optically Tested
Each unit is 100% optically tested to guarantee performance and reliability upon deployment.
Applications
- Fiber optic patch panels
- Data center cross-connects
- Telecommunications distribution frames
- LAN/WAN network installations
Technical Specifications
| Specification | Value |
|---|---|
| Model | PCFF3DSP007-BI |
| Part Number | 682X076 |
| Connector A | SC/UPC |
| Connector B | SC/UPC |
| Fiber Mode | Single Mode |
| Fiber Type | G.657.A1 Bend Insensitive |
| Cable Type | Duplex |
| Cable Length | 7m |
| Insertion Loss | <0.3dB |
| Return Loss | >55dB |
| Minimum Bend Radius | 10mm |
| Jacket Material | PVC |
| Jacket Diameter | 2.8mm |
Frequently Asked Questions
What does BI stand for?
BI stands for Bend Insensitive. It indicates that the fiber is engineered to maintain low signal loss even when the cable is bent at a tighter radius than standard single mode fiber.
Is this cable suitable for outdoor use?
No, this cable is designed with a PVC jacket, which is intended for indoor applications.
What is the polish type on these connectors?
The connectors are SC/UPC, which denotes an Ultra Physical Contact polish.
Can I use this for high-speed data transmission?
Yes, this single mode patch cable is suitable for high-bandwidth data applications.
Is the length customizable?
This specific part number is for a 7-meter length cable. Other lengths are available as separate part numbers.