sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The FiberXP® PC416DFP001 is a high-quality duplex multimode fiber optic patch cable designed for reliable data transmission in network environments. Built with a 50-micron OM2 core, this cable is engineered for standard multimode fiber applications, providing consistent performance for network interconnections.
Constructed with a 2.8mm PVC jacket, the cable offers durability for indoor routing. It features SC/PC and ST/PC connectors on each end, ensuring precise physical contact alignment. Each cable is 100% optically tested for insertion loss and back reflection to ensure performance standards are met upon installation.
Key Features
-
SC to ST Duplex Connectors
Standardized connectors ensure broad compatibility with existing patch panels and active equipment ports. -
OM2 50/125μm Fiber
Optimized for multimode data transmission, suitable for various LAN and building backbone applications. -
2.8mm PVC Jacket
Protective outer sleeve provides essential mechanical protection during routing and installation. -
100% Optically Tested
Ensures every cable meets stringent insertion loss and back reflection requirements before shipping. -
Duplex Configuration
Supports simultaneous bi-directional data flow required for standard network communications. -
Physical Contact (PC) Polish
Ensures high-quality contact between fiber end-faces for stable signal integrity.
Applications
- Local Area Networks (LAN)
- Building Backbone Cabling
- Data Center Interconnects
- Fiber Patch Panels
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 682X933 |
| Model | PC413DFP001 |
| Fiber Type | Multimode OM2 |
| Core Size | 50μm |
| Connector A | SC/PC |
| Connector B | ST/PC |
| Fiber Count | Duplex |
| Cable Length | 1 Meter |
| Jacket Material | PVC |
| Jacket Diameter | 2.8mm |
Frequently Asked Questions
Is this cable suitable for high-speed 10G networks?
This is an OM2 patch cable, which is generally suited for legacy and lower-speed multimode applications. 10G networks typically require OM3 or OM4 laser-optimized fiber.
Are the connectors SC and ST on both ends?
No, this is an SC to ST patch cable, meaning it has an SC connector on one end and an ST connector on the other.
Does this cable include a test report?
The product is 100% optically tested for insertion loss and back reflection to ensure performance, though a serialized test report may not be included in the packaging.
Can I use this for outdoor applications?
No, this cable features a standard PVC jacket intended for indoor use. It is not rated for exposure to UV light, moisture, or extreme environmental conditions found outdoors.
What does the OM2 designation mean?
OM2 refers to the fiber standard supporting 50/125μm core/cladding diameter, typically used for moderate distance multimode data transmission.