sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The Fluke Networks SMC-9-SCFCAPC is a high-quality single mode fiber optic launch cable, specifically engineered for precision testing and troubleshooting in high-speed network environments. This essential tool serves as an interface between an OTDR and the link under test, enabling accurate end-to-end loss measurements by accounting for the dead zone of the equipment.
Constructed with a 9/125µm core/cladding diameter, this launch cable ensures compatibility with standard single mode infrastructure. It features a length of 160 meters (525 feet), providing sufficient distance for standard pulse widths, and is terminated with SC and FC APC connectors to facilitate reliable signal transmission during fiber optic network inspections and commissioning.
Key Features
-
Single Mode Fiber Design
Features a 9/125µm core/cladding diameter designed for standard single mode network compatibility. -
Extended Length
Provides a 160-meter (525 feet) reach to accurately measure link loss and bypass equipment dead zones. -
Precision Connectors
Equipped with SC and FC APC connectors to minimize back-reflection and ensure signal integrity. -
Troubleshooting Capability
Essential for verifying fiber optic link performance during installation and maintenance cycles. -
OTDR Compatibility
Designed to function as a launch or receive cable to ensure accurate loss characterization. -
Durable Construction
Designed for use in field environments where stability and reliable optical performance are required.
Applications
- High-speed fiber optic network installation
- OTDR link loss characterization
- Field troubleshooting and maintenance
- Network inspection and certification
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Fluke Networks |
| Model | SMC-9-SCFCAPC |
| Part Number | 044X970 |
| Fiber Type | Single Mode |
| Core/Cladding Size | 9/125µm |
| Cable Length | 160 meters (525 feet) |
| Connector A | SC |
| Connector B | FC APC |
Frequently Asked Questions
What is an OTDR launch cable used for?
A launch cable is used to bridge the dead zone of an OTDR, allowing the tester to accurately measure the loss of the first and last connectors in a fiber link.
Is this cable for single mode or multimode applications?
This specific model is designed for single mode fiber applications (9/125µm).
What does the APC designation mean?
APC stands for Angled Physical Contact, which uses an 8-degree angle on the connector face to reduce back-reflection (return loss).
Can I use this for both receiving and launching?
Yes, this cable can be utilized as either a launch or a receive test cable depending on the specific testing requirement.
What is the total length of this cable?
The cable is 160 meters long, which is approximately 525 feet.