Dual channel Fast Ethernet 10/100BaseTx to SFP fiber media converter w/ web based management support
The FRM220-10-100iS-2 dual channel Fast Ethernet is a powerful fiber media converter with two 10/100Base-TX copper to Fast Ethernet SFP slots on a single card. Any 100Base-FX/BX/ZX or WDM/CWDM SFP transceiver can be installed in the SFP slots of the FRM220-10/100iS-2 converter. VLAN settings can be performed to aggregate traffic into a 4 port Fast Ethernet switch. Unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. These features are available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-10/100iS-2 can accommodate any type of miniGBIC (SFP) optical modules, either multi-mode, singlemode or single strand Bi-Directional type. Unit is offering unparalleled flexibility and easy migration from short-haul to long haul fiber connections by simply changing the optical module interface. The Fast Ethernet copper interfaces have auto-negotiation and speed selection from 10/100 Mbps.
The FRM220-10/100iS-2 dual channel Fast Ethernet converter is extremely versatile, being available in several versions of power supply:external AC adapter,embedded internal AC power,embedded internal DC neg. 48V powerordual combo embedded AC and DC power supply. Same model can also be installed in theFRM220chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-10/100iS-2 Fast Ethernet media converter is one of the best choices of media converters for data carriers and service providers.
|Interfaces:||Two RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX and two SFP slots for 802.3 100Base-X optical standards|
|Connectors:||2 x RJ-45 copper 10/100 Mbps and 2 x SFP slot 100Mbps|
|UTP port:||MDI/MDI-X, auto-negotiation, Full/Half Duplex, supports Jumbo Packets 9K in converter mode and 2048bytes packet size in switch mode|
|Features:||Support for QinQ double tagged packets/ bandwidth control (N x 32K or N x 512K granularity)|
|Front LEDs:||FEF, Fiber Link 1, Fiber Link 2, ACT, Link 3, Link 4|
|Power:||External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug|
|Temperature:||0 5°C (Operating); 0 7°C (Storage)|
|Humidity:||20 80% non condensing (Operating); 0 90% (Storage)|
|Consumption:||less than 4W|
|Dimensions(WxDxH):||85.6mm x 122.6mm x 20mm|
|Weight:||340g (without AC adapter)|
|Compliance:||CE, FCC Class A|