FS-IES5110-20FMS, 20-Port Ethernet L2+ Managed Industrial Switch, 10 x 1Gb SFP, 10 x 1/2.5Gb SFP, with 4 x Gigabit RJ45/SFP Combo, 4 x 10Gb SFP+ Uplinks, Wide-Temp

The FS-IES5110-20FMS features 10-port 1Gb SFP with 4x 1G RJ45/SFP Combo, 10-port 1/2.5Gb SFP, and 4-Port 10G SFP, which is designed especially for a broad spectrum of industrial and extended enterprise connectivity needs.

Equipped with an IP30-rated metal enclosure, it can operate within a wide temperature range of -40 to 75°C (-40 to 167°F). This switch is ideal for harsh environments, such as traffic control cabinets, factory floors, and outdoor places where the temperature is extremely low or high.

This layer 2 industrial managed switch supports enhanced L2+ functions such as ACL, QoS, LACP link aggregation, etc, can meet the requirements of many scenarios in industrial environments.

Specifications

• Ports: 10x 1G SFP with 4x 1G RJ45/SFP Combo | 10x 1/2.5G SFP | 4x 10G SFP+
  
• MAC Addresses: 32K
  
• Switching Capacity: 158Gbps
  
• Input Voltage: AC:100-240V; DC: 24-60V
  
• Forwarding Rate: 117.5Mpps
  
• Max.Power Consumption: AC input: Max. 38.3 watts/131.4 BTU; DC input: Max.
• 41.4 watts/142 BTU
  
• Flash Memory: 64MBytes
  
• Operating Temperature: -40 to 75°C (-40 to 167°F)
  
• Jumbo Frame: 10K bytes
  
• Storage Temperature: -40 to 80°C (-40 to 176°F)
  
• Packet Buffer: 32Mbits
  
• Operating Humidity: 5%~95%(Non-condensing)
  
• Dimensions(HxWxD）: 440 x 200 x 44.5 mm
  
• Installation: Rack units (RU): 1U
  
• Enclosure: IP30 rated metal enclosure
  
• Switch Architecture: Store-and-Forward
  
• ESD Protection: 6KV DC
  
• Address Table: 32K entries, automatic source address learning and aging DC input:Max. 41.4 watts/142 BTU

Product Highlights

• Supports Both High-voltage AC and Low-voltage DC Inputs.
  
• IP30 Metal Enclosure for -40 to 75°C Harsh Environments
  
• Support L2+ Static Routing, OSPF, DHCP Server
  
• Support ERPS, QinQ, LACP, ACL, QoS, etc.
  
• Support WEB/CLI/SSH/TLS/SNMP for Easy Network Management

Software Spotlights

• High Availability and Multi-Service Support
  Support the Spanning Tree Protocols (IEEE802.1d STP, IEEE802.1w RSTP, standard 802.1s MSTP)
• Support IEEE 1588v2 PTP
• Support the IPv4 and IPv6 multicast functions
• Support IGMP v1/v2/v3, IGMP snooping, MLD

Error-Free Network Configuration

• Support SNMP (Managed by Zabbix) v1, v2, and v3
• Support STP protocol protection (BPDU Guard)
• Support LACP, ERPS, etc
• Support traffic classification based strict priority and WRR
• Support 802.1P priority and DSCP remarking

Secure and Simplified Access for Users and IoTSupport WEB GUI, Telnet, SSH

• Support IEEE802.1X RADIUS authentication
• Support IPv4/IPv6 ACL
• Support DHCP snooping, DHCP server and relay
• Support IP source guard
• Support ARP inspection

Connectivity Solutions

Industrial Ring Redundancy Solution

Full Gigabit Ethernet Interfaces
FS-IES5110-20FMS is available with 4x 1G RJ45/SFP Combo, 4x 10G SFP+ and 10x 1G/2.5G SFP to provide secure access for high-speed applications in the industrial space.

IP30 Aluminum Metal Housing Suitable for Industrial Environments
FS-IES5110-20FMS is equipped with rugged IP30 metal enclosure to withstand a high degree of vibration and shock while operating in industrial environments from -40 to 75°C.

OSPF (Open Shortest Path First) for Simplified Network Management
OSPF simplifies topologies by splitting autonomous systems into areas, automatically calculates and renews the shortest path, and transmits link status information, reducing labor hours.

ERPS (Ethernet Ring Protection Switching) Enables Failover Protection in Sub-50ms
ERPS implements loop blocking and link recovery faster than STP on the main device, and can effectively add redundancy and up-time protection to any network.

Equipped with Console, Web and SNMP Management Interfaces
With the built-in Web-based management interface, the FS-IES5110-20FMS offers an easy-to-use, platform-independent management and configuration facility.