NGC4500FANA Viavi Certifier 40G Cat6A Master & Remote Unit Testing Kit
NGC4500FANA Viavi Certifier 40G Cat6A Master & Remote Unit Testing Kit
The VIAVI Certifier equips technicians with all the capabilities they need to certify both copper and fiber networks quickly, completely, and correctly for all current and future cabling standards for the new enterprise. To test and certify copper up to Category 6A, the Certifier10G is the cost-effective solution. Without support for fiber or Class FA, the Certifier10G is an entry-level copper certifier with the same benefits as Certifier40G
- Achieve complete network certification with one device
- Optimize productivity with the industry’s fastest test workflow
- Obtain comprehensive results for the latest TIA-568 and ISO 11801 requirements
- View test set up and results data and edit labels at both local and remote ends
Copper Testing
Certification testing: TIA 568-C.2 Cat 5e, 6, 6A ISO/IEC 11801, EN 50173 Class D, E, EA; Additionally Certifier40G supports; TIA 568-C.2-1 Cat 8; ISO/IEC 11801, EN 50173 Class F, FA
Autotest time – Cat6A/Class EA: 12 s
Autotest time – Class FA: 19 s
Maximm cable length for dualended autotest: 500 m
Insertion cycles (typical): Channel: 10,000; Permanent link: 5,000
Test parameters: As specified in TIA 1152, IEC 61935-1
Wiremap
Loop resistance: 0 to 40 Ω, ±0.1 Ω
Length: 0 to 500 m, ±0.5 m (dual-ended testing)
Propagation delay and delay skew: 0 to 5000 ns, ±1 ns
Attenuation: 0 to 70 dB, ±0.1 dB
Pair-to-pair and power sum NEXT: 0 to 85 dB, ±0.2 dB
Pair-to-pair and power sum ACR-F: 0 to 85 dB, ±0.2 dB
Return loss: 0 to 40 dB, ±0.2 dB
ACRN, PS ACRN: –25 to 85 dB, ±0.5 dB
Advanced diagnostics: Time-domain fault locator for RL and NEXT (200 m)
Measurement accuracy: ANSI/TIA-1152 Level 2G, IEC 61935-1; Draft Level VI (Certifier40G); ANSI/TIA-1152 Level IIIe, IEC 61935-1; Level IIIe (Certifier10G)
Measurement frequency range: 1 to 2,500 MHz (Certifier40G); 1 to 500 MHz (Certifier10G)
Fiber Testing – Multimode Encircled Flux Tier 1 (Loss/Length) Test Probes (Certifier40G only)
Wavelengths: 850 nm, 1300 nm
Autotest time: 10 seconds for dual-ended test
Test standards: TIA-568.3, IEC 14763-3, ISO 11801,; Network Limits
Measurement length: 0 to 1,000 m, ±1.5 m
Transmitter
Connector type: FC
EF compliance: IEC 61280-4-1, TIA-526-14C
Power: –16 to –20 dBm
Source type: LED
Spectral width: ±15 nm
Receiver
Connector type: Interchangeable (SC, LC, ST)
Dynamic range: 12 dB
Sensitivity: –40 dBm
Resolution: 0.01 dB
Visual fault locator
Wavelength: 650 nm
Power: 0 dBm
Fiber Testing – Single-Mode Tier 1 (Loss/Length) Test Probes (Certifier40G only)
Wavelengths: 1310 nm, 1550 nm
Autotest time: 10 seconds for dual-ended test
Test standards: TIA-568.3, IEC 14763-3, ISO 11801, Network Limits
Measurement length: 0 to 10,000 m, ±1.5 m
Transmitter
Connector type: SC
Power: –5 dBm to –9 dBm
Source type: Laser
Receiver
Connector type: SC (Adapters for LC available)
Dynamic range: 31 dB
Sensitivity: –40 dBm
Resolution: 0.01 dB
Fiber Testing – Multimode MPO/MTP Light Source/Power Meter Kit (Certifier40G only)
Autotest
Test time: 5 s
Test parameters: Loss per channel in graphical andtabular format, polarity of link (A, B, C, Custom), pass/fail against user set limit
MPO link configurations: All 12 fibers or user-selected channels
Test configurations: MPO-MPO MPO-SC/LC (Requires duplex multimode fiber adapter on local unit)
MPO Light Source Adapter
Fiber/connector type: Multimode MPO (Type A, pinned)
Wavelength: 830 – 860 nm
MPO Power Meter Adapter
Fiber/connector type Multimode MPO (Type A, pinned)
Loss Measurement
Dynamic range: 15 dB
Accuracy: ±0.2 dB
Verification period: Yearly verification recommended (copper calibration stored on mainframe, fiber calibration stored on fiber test probes)
General Specifications
Interfaces: Probe Interface, RJ45 Ethernet, USB host and device, talkset, power jack
Display: Industrial LCD, 6” touch sensitive area on both local and remote units
Enclosure: Ruggedized plastic with rubber overmold, withstands 1.5 m drop test on hard surface
Remote unit capabilities: View test results, edit labels, save results, start autotest
Power supply: AC 100 to 240 V to 12 V, 3 A power adapter
Input over-voltage protection: Protected against Telco voltages
Battery: Removable and rechargeable LiON Battery capacity >8 hours continuous operation
Internal storage capacity: 700 MB
Dimensions: 232 X 126 X 87 mm (9.1 X 5.0 X 3.4 in)
Weight: Approx. 1 kg (2.2 lb) per unit
Supported languages: Device supports 17 languages: Chinese, Traditional Chinese, Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish, Hungarian
Calibration period: 1 year (copper calibration stored on mainframe, fiber calibration stored on fiber test probes)
Environmental
Operating temperature: 0 to 40°C
Storage temperature: –20 to 60°C
Relative humidity: 10% to 80%